New Z or TT my 370?

370Z944 · 07-27-2022, 07:23 PM

vr38+vq37 = vrq75

Good one.

370Z944 · 07-27-2022, 08:29 PM

.....yeeeeeah... Gonna be a no. Cause no, the coolant passages don't line up. They're similar. Found a pic of each mating surface. So, no. The bolt pattern and coolant passages aren't the same. A deck plate/liners could possibly take care of the coolant passages, but that bolt pattern is all wrong.

Whole engine swap it is then. Dang it.

I had to delete and refresh everything to upload the rotated pic. For some reasson the site refuses to upload the edited version.

filip00 · 07-28-2022, 03:31 AM

Quote:

Originally Posted by 370Z944

.....yeeeeeah... Gonna be a no. Cause no, the coolant passages don't line up. They're similar. Found a pic of each mating surface. So, no. The bolt pattern and coolant passages aren't the same. A deck plate/liners could possibly take care of the coolant passages, but that bolt pattern is all wrong.

Whole engine swap it is then. Dang it.

I had to delete and refresh everything to upload the rotated pic. For some reasson the site refuses to upload the edited version.

Why give up because of that? I'm sure you could drill new holes into the block. It probably hasn't been done yet, but you can do it. I'm sure everyone here is interested in how that would work out.

JARblue · 07-28-2022, 12:43 PM

Quote:

Originally Posted by 370Z944

vr38+vq37 = vrq75

Good one.

Rusty · 07-28-2022, 01:26 PM

If 370z944 thinks Spooler is bad. Wait until he asks a question on rims and tires. Option Zero will rub the skin right off of him.

cv129 · 07-28-2022, 02:35 PM

Quote:

Originally Posted by Rusty

If 370z944 thinks Spooler is bad. Wait until he asks a question on rims and tires. Option Zero will rub the skin right off of him.

OZ has been pretty zen these couple years though. 370z944 will never know.

Rusty · 07-28-2022, 03:49 PM

Quote:

Originally Posted by cv129

OZ has been pretty zen these couple years though. 370z944 will never know.

He's mellowed.....a little......

redondoaveb · 07-28-2022, 04:10 PM

Quote:

Originally Posted by cv129

OZ has been pretty zen these couple years though. 370z944 will never know.

Mellowed? Read this thread

Anyone running kw1 coilovers?

Rusty · 07-28-2022, 04:51 PM

Quote:

Originally Posted by redondoaveb

Mellowed? Read this thread

Anyone running kw1 coilovers?

"Then stop coming into threads to whine about your ******* suspension"

Spooler · 07-28-2022, 05:34 PM

Quote:

Originally Posted by Rusty

"Then stop coming into threads to whine about your ******* suspension"

I laughed so hard when I read that. He was right though; dude was whining up a storm.

cv129 · 07-28-2022, 10:00 PM

Quote:

Originally Posted by redondoaveb

Mellowed? Read this thread

Anyone running kw1 coilovers?

last I checked that thread was when OZ gave OP the usual suspension write-up, figured that pretty much would end the thread…didn’t know it kept going and made a sharp turn lol.

Quote:

Originally Posted by Rusty

He's mellowed.....a little......

Well…revving past the redline has its consequence lol.

07-27-2022, 07:23 PM	#1 (permalink)
370Z944 Base Member Join Date: Oct 2017 Location: Las Vegas Posts: 33 Drives: 370zNismo/944 turbo Rep Power: 9	vr38+vq37 = vrq75 Good one. JARblue likes this.

07-28-2022, 01:26 PM	#5 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	If 370z944 thinks Spooler is bad. Wait until he asks a question on rims and tires. Option Zero will rub the skin right off of him. JARblue, gomer_110, danegrey and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html