Topgunz ROTREX C38R Supercharger Kit

redondoaveb · 04-05-2021, 08:59 PM

Quote:

Originally Posted by TopgunZ

Ran out of time on dyno. We were just making some power.
19psi at 7400rpm with a full filter setup at 1000ft elevation.

Without a filter at sea level revving to 7800, I bet we see 23psi.

Back to the dyno Wednesday.

It's a good thing you're installing a boost controller

TopgunZ · 04-07-2021, 07:44 PM

Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!!

708whp!
556wtq!
21.5psi!

All at only 7000rpm rev limit!

Stock block!

We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune.

This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard.

This kit will be able to bleed off boost for whatever power you want to make.

Still the most affordable supercharger kit on the market!

Tuned by the best... Eugene Turkov

Get yours here.... www.topgunspeedworks.com

redondoaveb · 04-07-2021, 08:02 PM

Quote:

Originally Posted by TopgunZ

Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!!

708whp!
556wtq!
21.5psi!

All at only 7000rpm rev limit!

Stock block!

We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune.

This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard.

This kit will be able to bleed off boost for whatever power you want to make.

Still the most affordable supercharger kit on the market!

Tuned by the best... Eugene Turkov

Get yours here.... www.topgunspeedworks.com

Great numbers, especially with a filter. Are you going to do a 17 psi dyno run?

NissanTracker · 04-08-2021, 08:45 AM

Damn... looks at that torque line, so much low to mid range power! Lots of fun factor right there without having to go TT's.

Jayhovah · 04-08-2021, 09:16 AM

Smells like alotta folks are about to go boosted.

VHRpurr · 04-08-2021, 09:24 AM

Quote:

Originally Posted by Jayhovah

Smells like alotta folks are about to go boosted.

Yeeees sir. I’m contemplating this or an FI TT setup only because the wife drives the car and she has never driven a single turbo car, only TT and SC. The more linear power curve will make it a lot easier for her to adapt. Decisions decisions....

Need video clips of this kit! Siiiick.

TopgunZ · 04-08-2021, 12:22 PM

Quote:

Originally Posted by VHRpurr

Yeeees sir. I’m contemplating this or an FI TT setup only because the wife drives the car and she has never driven a single turbo car, only TT and SC. The more linear power curve will make it a lot easier for her to adapt. Decisions decisions....

Need video clips of this kit! Siiiick.

Well, if cost and ease of install is part of the decision......

TopgunZ · 04-08-2021, 10:08 AM

The best part....we are barely scratching the surface of this kits capability.

I have a video clip on FB.

JARblue · 04-08-2021, 10:31 AM

Got any videos to share with people who aren't on FB or IG?

cgr406 · 04-08-2021, 11:08 AM

This is awesome! So what's the upgrade path / cost for those of us w/ the ACE kit? Or haven't you gotten there yet?

TopgunZ · 04-08-2021, 12:26 PM

Quote:

Originally Posted by cgr406

This is awesome! So what's the upgrade path / cost for those of us w/ the ACE kit? Or haven't you gotten there yet?

There will be a buy back program. I have not worked out the numbers.

NorthStyle · 04-08-2021, 06:33 PM

Amazing results!!

2 questions:
1) Is there any particular reason you only ran up to 7k rpm on the dyno?
2) Is the boost control function included in the price of the kit currently listed on your website?

EDIT: Ran out of injector... nevermind lol

TopgunZ · 04-08-2021, 07:07 PM

1) Seen you got it
2) yes!

redondoaveb · 04-08-2021, 07:11 PM

Is it going back on the dyno with the boost controller? If so, can you give 17 psi results.

TopgunZ · 04-09-2021, 06:59 AM

Quote:

Originally Posted by redondoaveb

Is it going back on the dyno with the boost controller? If so, can you give 17 psi results.

We will be going back to the dyno with 1450cc injectors and boost control in place. We have the Innovate SCG-1 so we can dial it right in.

04-07-2021, 07:44 PM	#2 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!! 708whp! 556wtq! 21.5psi! All at only 7000rpm rev limit! Stock block! We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune. This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard. This kit will be able to bleed off boost for whatever power you want to make. Still the most affordable supercharger kit on the market! Tuned by the best... Eugene Turkov Get yours here.... www.topgunspeedworks.com scratchdvinyl, JARblue, Rusty and 7 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-08-2021, 08:45 AM	#4 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 725 Drives: 07' Nismo, 14' Nismo Rep Power: 29263	Damn... looks at that torque line, so much low to mid range power! Lots of fun factor right there without having to go TT's. DaveZ03 likes this. Last edited by NissanTracker; 04-08-2021 at 08:57 AM.

04-08-2021, 10:08 AM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	The best part....we are barely scratching the surface of this kits capability. I have a video clip on FB. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-08-2021, 10:31 AM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	Got any videos to share with people who aren't on FB or IG? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-08-2021, 11:08 AM	#10 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3368	This is awesome! So what's the upgrade path / cost for those of us w/ the ACE kit? Or haven't you gotten there yet? __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

04-08-2021, 06:33 PM	#12 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,312 Drives: 2011 370Z Nismo Rep Power: 24278	Amazing results!! 2 questions: 1) Is there any particular reason you only ran up to 7k rpm on the dyno? 2) Is the boost control function included in the price of the kit currently listed on your website? EDIT: Ran out of injector... nevermind lol Last edited by NorthStyle; 04-08-2021 at 06:43 PM.

04-08-2021, 07:07 PM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	1) Seen you got it 2) yes! NorthStyle likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-08-2021, 07:11 PM	#14 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,382 Drives: 2014 Nismo Gunmetal Rep Power: 2684376	Is it going back on the dyno with the boost controller? If so, can you give 17 psi results. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 750whp/700ft.lbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Rotrex C38R Supercharger	R3drckt09	Forced Induction	145	02-05-2023 08:37 AM
rotrex c38r spec sheet	tiller	Forced Induction	11	09-13-2018 11:57 AM
Rotrex C38R & are HR/VHR GTM SC mounting brackets the same?	SS_Firehawk	Engine & Drivetrain	6	02-09-2018 10:33 PM
Replacement Rotrex Supercharger for the GTM Stage 1 kit	wind.zero	Forced Induction	29	06-03-2014 06:20 AM
[FOR SALE] Rotrex C38-81 Supercharger Only	pokeyl	Parts for sale (Private Classifieds)	3	02-17-2014 09:07 AM

***Topgunz ROTREX C38R Supercharger Kit***

Topgunz ROTREX C38R Supercharger Kit