Topgunz ROTREX C38R Supercharger Kit

Geeoo · 03-31-2021, 08:39 PM

Quote:

Originally Posted by TopgunZ

I'll still place them on my site tomorrow since now I know this thing is going to way outperform anything else out there. I just won't have an actual dyno on the listing.

Awesome, will def preorder!

NissanTracker · 03-31-2021, 10:14 PM

Wow, this is exciting. I run the v1 A-A kit on my 350z nismo and I always felt that there needed to be more lower end power. I made 450wHP at 12psi, 93 octane on a conservative tune, with the K&N filter still on. (running stock cats on a motordyne TDX2)

I recently picked up a 14' 370z nismo and like redondo, I planned to go FI TT's with a built bottom end. I'll have to watch this progress.

NissanTracker · 03-31-2021, 10:16 PM

are you able to reveal which tuner(s) are you working with that will support this kit?

(i've been using Seb for the v1 kit on my 350)

takemorepills · 03-31-2021, 10:37 PM

When will pics of the fully developed kit, with the air filter, be available?

TopgunZ · 03-31-2021, 10:42 PM

Quote:

Originally Posted by NissanTracker

are you able to reveal which tuner(s) are you working with that will support this kit?

(i've been using Seb for the v1 kit on my 350)

Eugene Turkov from infinity auto care

TopgunZ · 03-31-2021, 10:46 PM

Quote:

Originally Posted by takemorepills

When will pics of the fully developed kit, with the air filter, be available?

Well, here is a screenshot of a video from the dyno today. It's the best I got. Lol. We are taking professional photos once it's tuned.

The filter is placed where you can remove it for cleaning by simply pulling back the fender liner.

You could also swap on a turboguard easily but I don't think anyone will want to unless they have a fully built motor.

Janjua8 · 03-31-2021, 11:24 PM

Is this going to have the turn key option like the ace did? Injectors, fuel pump, tune...etc etc.

Also, if someone (me af) didn't want to go into the built motor arena and really just wanted 400whp daily (or rigorous track abuse) and < 550whp when doing power pulls (just to stay safe and be happy with the car for a longer time).....How would they go about that? Just control the boost with the interior mod you talked about?

Sent from my SM-N975U using Tapatalk

TopgunZ · 03-31-2021, 11:32 PM

Quote:

Originally Posted by Janjua8

Is this going to have the turn key option like the ace did? Injectors, fuel pump, tune...etc etc.

Also, if someone (me af) didn't want to go into the built motor arena and really just wanted 400whp daily (or rigorous track abuse) and < 550whp when doing power pulls (just to stay safe and be happy with the car for a longer time).....How would they go about that? Just control the boost with the interior mod you talked about?

Sent from my SM-N975U using Tapatalk

Everything you need for a complete kit is on my site. I'll place what to buy for what power levels in the description of the supercharger.

Yes, there will be a way to control boost. Trust me it's going to have to happen or I am going to start selling my own line of pistons and rods.

Janjua8 · 04-01-2021, 03:40 AM

Quote:

Originally Posted by TopgunZ

Everything you need for a complete kit is on my site. I'll place what to buy for what power levels in the description of the supercharger.

Yes, there will be a way to control boost. Trust me it's going to have to happen or I am going to start selling my own line of pistons and rods.

See that's the thing I admire most about the work you do. You think ahead of not just that the product be good, but what the not so logically enhanced people may do with that great product and then blame you for it...lmao. As sad as it is, it's the reality. You minimize all obstacles that someone can run into due to negligence or ignorance, which is why your stuff lasts. I've seen many great products and ideas (not just with cars) go to sh*t because of how they were used or what people did with it...good stuff brotha

Sent from my SM-N975U using Tapatalk

Geeoo · 04-01-2021, 04:36 PM

What’s the maintenance like on the c38R? Is it gonna need a dedicated oil cooler?

TopgunZ · 04-01-2021, 06:02 PM

Quote:

Originally Posted by Geeoo

What’s the maintenance like on the c38R? Is it gonna need a dedicated oil cooler?

It comes with its own dedicated setrab oil cooler and reservoir. It doesn't require a pump so there isn't any wiring involved. What does this do? Aids in longevity and 50,000 mile oil changes!

bcfromfl · 04-01-2021, 08:34 PM

Quote:

Originally Posted by TopgunZ

Oh I forgot. Zero BOV flutter!!

When you say zero BOV flutter, are you combining the noise that also includes the compressor surge/chatter? If so, is this solved by the intake tubing and the pleated filter? Is the positioning of the Vortech s/c on the ACE system compatible with the new intake?

Thanks.

Spec Jay · 04-01-2021, 08:41 PM

Always disliked the design with the Stillen plenum so I went with the BP kit. Found out that PTE turbos no matter how you tuned them had too much of a spike on track so I was gonna switch to a Garrett G series hoping for some improvement but this might be the way to go!

TopgunZ · 04-01-2021, 09:30 PM

Quote:

Originally Posted by Spec Jay

Always disliked the design with the Stillen plenum so I went with the BP kit. Found out that PTE turbos no matter how you tuned them had too much of a spike on track so I was gonna switch to a Garrett G series hoping for some improvement but this might be the way to go!

This thing moves power way left on the graph. But it is also perfectly linear so it is extremely predictable. Just bleed off whatever boost you don't want at the top end. It really makes for a great track car. We will have a few heavy track use builds this year.

TopgunZ · 04-01-2021, 10:15 PM

Quote:

Originally Posted by bcfromfl

When you say zero BOV flutter, are you combining the noise that also includes the compressor surge/chatter? If so, is this solved by the intake tubing and the pleated filter? Is the positioning of the Vortech s/c on the ACE system compatible with the new intake?

Thanks.

Flutter=chatter. Its not surge on the ace kits it's 100% the bov oscillating. I've said this a bunch of times. It's just audible from the supercharger inlet. I have my custom bov filter on the QRJ plus a filter on the supercharger so it eliminates the audible fluctuations of the bov under a zero vacuum situation.

The intake and filter cannot work on the vortech units. They get positioned too far up and over to get a pipe to them.

03-31-2021, 10:37 PM	#79 (permalink)
takemorepills Base Member Join Date: Apr 2019 Location: Seattle, WA Posts: 196 Drives: Q60 3.7 AWD Rep Power: 6716	When will pics of the fully developed kit, with the air filter, be available? Optimiser likes this.

03-31-2021, 11:24 PM	#82 (permalink)
Janjua8 Base Member Join Date: Apr 2017 Location: Edison, New Jersey Posts: 27 Drives: 2014 370Z MidBlu M6 Rep Power: 8	Is this going to have the turn key option like the ace did? Injectors, fuel pump, tune...etc etc. Also, if someone (me af) didn't want to go into the built motor arena and really just wanted 400whp daily (or rigorous track abuse) and < 550whp when doing power pulls (just to stay safe and be happy with the car for a longer time).....How would they go about that? Just control the boost with the interior mod you talked about? Sent from my SM-N975U using Tapatalk Optimiser likes this.

04-01-2021, 08:41 PM	#88 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	Always disliked the design with the Stillen plenum so I went with the BP kit. Found out that PTE turbos no matter how you tuned them had too much of a spike on track so I was gonna switch to a Garrett G series hoping for some improvement but this might be the way to go! __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Rotrex C38R Supercharger	R3drckt09	Forced Induction	145	02-05-2023 08:37 AM
rotrex c38r spec sheet	tiller	Forced Induction	11	09-13-2018 11:57 AM
Rotrex C38R & are HR/VHR GTM SC mounting brackets the same?	SS_Firehawk	Engine & Drivetrain	6	02-09-2018 10:33 PM
Replacement Rotrex Supercharger for the GTM Stage 1 kit	wind.zero	Forced Induction	29	06-03-2014 06:20 AM
[FOR SALE] Rotrex C38-81 Supercharger Only	pokeyl	Parts for sale (Private Classifieds)	3	02-17-2014 09:07 AM

03-31-2021, 10:14 PM	#77 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29261	Wow, this is exciting. I run the v1 A-A kit on my 350z nismo and I always felt that there needed to be more lower end power. I made 450wHP at 12psi, 93 octane on a conservative tune, with the K&N filter still on. (running stock cats on a motordyne TDX2) I recently picked up a 14' 370z nismo and like redondo, I planned to go FI TT's with a built bottom end. I'll have to watch this progress.

03-31-2021, 10:16 PM	#78 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29261	are you able to reveal which tuner(s) are you working with that will support this kit? (i've been using Seb for the v1 kit on my 350)

04-01-2021, 04:36 PM	#85 (permalink)
Geeoo Base Member Join Date: Dec 2019 Location: AZ Posts: 8 Drives: 09 Nissan 370Z M6 Rep Power: 5	What’s the maintenance like on the c38R? Is it gonna need a dedicated oil cooler?

***Topgunz ROTREX C38R Supercharger Kit***

Topgunz ROTREX C38R Supercharger Kit