Belt slippage after upgrading to SI trim and turbo guard filter

Optimiser · 10-27-2020, 11:57 PM

Quote:

Originally Posted by Mariokart

Ok guys so an update on where I am at. Any further help will Be appreciated here.

So far I have swapped from the Tbatt additional pulley for tension to the tongunz pulley. Have also swapped to a new belt to suit the top gunz pulley (belt is gates K071045). I also swapped the auto tensioner with a new one.

I'm still having slip issues. From my logs it peaks around 12.3psi at 6k rpm then starts dropping down to around 9psi by 7800rpm

While the belt was off I noticed one of the idler pulleys was quite resistent and not spinning smoothly and I'll be changing that next. Would that be it? If not.. Where do I go from here. Its getting frustrating now ��

Are you using 1 or more high traction pulleys as I mentioned to you before?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New turbo guard pre-filter	Jinxx	Forced Induction	6	06-05-2019 03:01 PM
Turbo-Guard for Stillen build	redondoaveb	Forced Induction	11	10-25-2017 08:45 AM
[FOR SALE] OEM Center Console with Navigation trim/control panel/radio trim	370Z JT	Parts for sale (Private Classifieds)	5	03-04-2016 07:40 AM
Air filter - Fram CA10544 extra guard	zefaulter	Intake/Exhaust	39	07-06-2013 12:11 AM
Scheduled maintenance: belt, radiator cap, brake fluid, water pump, fuel filter, p/s	wdkwang	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	05-08-2012 10:57 AM