Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 12-03-2019, 09:21 PM

Quote:

Originally Posted by Senna-F1

Who is the tuner? Will it be remote tuned or local?

Eugene will be remoting in for us.

Dahawkster · 12-05-2019, 03:21 PM

Is anybody else constantly refreshing the page waiting for the results?

nic370 · 12-05-2019, 03:23 PM

Quote:

Originally Posted by Dahawkster

Is anybody else constantly refreshing the page waiting for the results?

I wasn't..... but now I am lol

Sent from my SM-G960F using Tapatalk

TopgunZ · 12-05-2019, 03:57 PM

So close!! Car wouldn't fit on the Dyno. This rig is slammed and with the widebody kit it was scrapping on the ramps. Also, the shop said the straps would be held tight against the cans on the Berk since it sits so low. It's in the shop now. We are removing the rear fenders and side skirts for clearance. Also removing the cans on the exhaust.

Dyno rescheduled for Thursday. Another week of waiting. Sorry guys. Pics for proof.

nic370 · 12-05-2019, 04:01 PM

Sweet
Is that the finished intake ?

Sent from my SM-G960F using Tapatalk

bcfromfl · 12-05-2019, 08:53 PM

Sounds like the dyno run will be done without any exhaust restriction? Will that give inflated results?

TopgunZ · 12-10-2019, 03:51 PM

Quote:

Originally Posted by bcfromfl

Sounds like the dyno run will be done without any exhaust restriction? Will that give inflated results?

The real gains have already been made by swapping out from the stock exhaust. The straight through design of any good forced induction exhaust doesn't really create that much of a restriction, unlike the stock exhaust. It might pick up a couple more ponies but nothing that would be looked at as inflated numbers by just removing the rear cans.

Inflated numbers are when you remove a known to be restrictive air filter entirely like some places have done and then post up numbers saying your kit makes 80whp more than the competition. I don't operate that way.

HapaZ · 12-10-2019, 07:13 PM

Anyone else annoyed that today is only Tuesday? Looking forward to seeing how this goes!!

TopgunZ · 12-11-2019, 10:23 AM

Quote:

Originally Posted by nic370

Sweet
Is that the finished intake ?

Sent from my SM-G960F using Tapatalk

To shed some light on this. Yes and no. It will be very close but we may not have left enough room for a bash bar so it might move over just a tad. However, we have a metal intake that goes from 3.5" to 3.25", passing through the radiator shroud, back to 3.5". There is zero chance of anything collapsing as it is metal throughout and it models flow to be amazing. Im really excited to see what we make with that in combination with the OEM manifold.

The only thing I wish I could change is that we will only be able to dyno on 93 octane tomorrow. We can conclude what it will make on E85 though and I have several guys ready to throw this kit on and throw down some E85 numbers.

TopgunZ · 12-12-2019, 10:27 AM

Wish us luck! We are driving to the Dyno in a few hours and it is snowing here like crazy!

kinitox · 12-12-2019, 10:30 AM

Quote:

Originally Posted by TopgunZ

Wish us luck! We are driving to the Dyno in a few hours and it is snowing here like crazy!

Pictures and videos please!

Enviado desde mi CLT-L29 mediante Tapatalk

cgr406 · 12-12-2019, 11:07 AM

Yay for Dyno day!! Good luck!!

Sent from my Pixel 3 using Tapatalk

TopgunZ · 12-12-2019, 08:13 PM

We have a winner! Not only did we meet the goal of 500whp on pump gas but exceeded it by quiet a bit. More pics and videos to come.

Megamarines · 12-12-2019, 08:26 PM

Oh damn I definitely want this. Throw me on a kit list haha

redondoaveb · 12-12-2019, 08:39 PM

Quote:

Originally Posted by TopgunZ

We have a winner! Not only did we meet the goal of 500whp on pump gas but exceeded it by quiet a bit.

Good numbers. 9lb pulley snd that's it?

12-05-2019, 03:21 PM	#92 (permalink)
Dahawkster Base Member Join Date: May 2015 Location: Hawaii Posts: 71 Drives: 09 370z 6sp sprt pkg Rep Power: 9	Is anybody else constantly refreshing the page waiting for the results? wideglideleon, Supmar85 and bushyguy like this.

12-05-2019, 03:57 PM	#94 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	So close!! Car wouldn't fit on the Dyno. This rig is slammed and with the widebody kit it was scrapping on the ramps. Also, the shop said the straps would be held tight against the cans on the Berk since it sits so low. It's in the shop now. We are removing the rear fenders and side skirts for clearance. Also removing the cans on the exhaust. Dyno rescheduled for Thursday. Another week of waiting. Sorry guys. Pics for proof. Rusty, hustleman222, sx moneypit and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-05-2019, 04:01 PM	#95 (permalink)
nic370 Base Member Join Date: Apr 2015 Location: uk Posts: 187 Drives: 370 Rep Power: 10	Sweet Is that the finished intake ? Sent from my SM-G960F using Tapatalk hustleman222 and wideglideleon like this.

12-05-2019, 08:53 PM	#96 (permalink)
bcfromfl Enthusiast Member Join Date: Nov 2016 Location: Youngstown, FL Posts: 256 Drives: 2015 PW Nismo 6MT Rep Power: 8	Sounds like the dyno run will be done without any exhaust restriction? Will that give inflated results? wideglideleon likes this. __________________ Michelin PS4S 275/35F, 305/30R /// Exhaust: Motordyne ART Pipes, Garageline X and Mid-Pipe Combo /// Clutch: ZSpeed EZ-Street Stage II, RJM HD Master Cylinder

12-10-2019, 07:13 PM	#98 (permalink)
HapaZ Base Member Join Date: Sep 2014 Location: NorCal Posts: 242 Drives: 2012 370z Base Coupe Rep Power: 10	Anyone else annoyed that today is only Tuesday? Looking forward to seeing how this goes!! cgr406 and Dahawkster like this.

12-12-2019, 10:27 AM	#100 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Wish us luck! We are driving to the Dyno in a few hours and it is snowing here like crazy! Dahawkster, turtle64b, bushyguy and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-12-2019, 11:07 AM	#102 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	Yay for Dyno day!! Good luck!! Sent from my Pixel 3 using Tapatalk redondoaveb likes this. __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

12-12-2019, 08:13 PM	#103 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	We have a winner! Not only did we meet the goal of 500whp on pump gas but exceeded it by quiet a bit. More pics and videos to come. andy_meng1024, scratchdvinyl, ByThaBay and 10 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 12-12-2019 at 09:50 PM.

12-12-2019, 08:26 PM	#104 (permalink)
Megamarines Base Member Join Date: Apr 2019 Location: San Ramon, CA Posts: 30 Drives: 2019 Nismo 370Z Rep Power: 3361	Oh damn I definitely want this. Throw me on a kit list haha

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 05:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 06:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 09:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 12:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 12:37 PM