Fast Intentions Stage 2 TT build by MA-Motorsports.

Rusty · 04-30-2019, 08:30 PM

Quote:

Originally Posted by Spooler

Houston, we have a problem. The tuning was going well last Friday at 10-11psi of boost. Making in the 550hp range. He then started to turn up the boost and the motor didn't respond. Turned it up 5psi of boost and it only made 5 more hp. So, Carl stopped and pulled the car off the dyno. They will be doing a bunch of double checks on the timing today. I hope they find the issue. Building and modifying cars is not always peaches and creme. SNAFU, it is my car. This is par for the coarse. I may not make it to Zdayz with it. No worries, plan B will be implemented. Not real happy at the moment but sheit happens.

Wish you had better news to report.

. Hopefully it's something simple.

Spooler · 04-30-2019, 09:47 PM

Quote:

Originally Posted by Rusty

Wish you had better news to report.

. Hopefully it's something simple.

I have no idea. I didn't message or call them today. Will do the same tomorrow, etc. I am going to Zdayz and have fun. Call me when it's fixed. I need a vacation. Only question I have for them is this, "Do you need a match"....

URBiN~HURMiT · 04-30-2019, 10:17 PM

Quote:

Originally Posted by Spooler

Houston, we have a problem. The tuning was going well last Friday at 10-11psi of boost. Making in the 550hp range. He then started to turn up the boost and the motor didn't respond. Turned it up 5psi of boost and it only made 5 more hp. So, Carl stopped and pulled the car off the dyno. They will be doing a bunch of double checks on the timing today. I hope they find the issue. Building and modifying cars is not always peaches and creme. SNAFU, it is my car. This is par for the coarse. I may not make it to Zdayz with it. No worries, plan B will be implemented. Not real happy at the moment but sheit happens.

Mine made about 500 whp (don't have the exact number) on 11 ~ 13 lbs of boost on pump gas with the Borg Warner 71/63's
Again, sorry I don't have the exact numbers - Daelen had relayed this info to me from his recollection of a conversation with Carl when he was doing the pump gas Tune.

Daelen also told me that they stop increasing the boost when it makes less than 10 whp per 1 lb of boost increase.

The law of diminishing returns --- no significant performance gain but the risk to the motor significantly increases.

I'm still dialing in the car (and my driving skills) on pump gas before I go E85.

jchammond · 05-01-2019, 05:35 AM

Quote:

Originally Posted by Spooler

I have no idea. I didn't message or call them today. Will do the same tomorrow, etc. I am going to Zdayz and have fun. Call me when it's fixed. I need a vacation. Only question I have for them is this, "Do you need a match"....

What am I gonna do with these XL “Depends”

I can bring them for Russ

Rusty · 05-01-2019, 08:02 AM

Quote:

Originally Posted by jchammond

What am I gonna do with these XL “Depends”

I can bring them for Russ

They're too big for me. You can save them for later.

JARblue · 05-01-2019, 08:12 AM

Quote:

Originally Posted by Rusty

Best place to dump a dead body is in a hog pen. The hogs will eat everything.

You'll want to shave excess hair and remove any teeth. They aren't good for the pig's digestive system

Rusty · 05-01-2019, 08:42 AM

Quote:

Originally Posted by JARblue

You'll want to shave excess hair and remove any teeth. They aren't good for the pig's digestive system

They will eat bone.

Spooler · 05-01-2019, 09:12 AM

Quote:

Originally Posted by jchammond

What am I gonna do with these XL “Depends”

I can bring them for Russ

I am sure you will need them for the Vette ride. LOL

JARblue · 05-01-2019, 09:26 AM

Quote:

Originally Posted by Rusty

They will eat bone.

Teeth are not bone... they need to be removed. Trust me

Rusty · 05-01-2019, 04:29 PM

Quote:

Originally Posted by JARblue

Teeth are not bone... they need to be removed. Trust me

After they go through a wood chipper, who cares.

JARblue · 05-01-2019, 08:59 PM

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

Spooler · 05-01-2019, 10:34 PM

Quote:

Originally Posted by JARblue

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

Rusty · 05-01-2019, 10:37 PM

Quote:

Originally Posted by JARblue

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

That's what I had in mind. Only direct the discharge into the hog pen.

Rusty · 05-01-2019, 10:37 PM

Quote:

Originally Posted by Spooler

Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

Spooler · 05-02-2019, 08:31 AM

Timing chains are good to go. Checking VVEL now.

05-01-2019, 08:59 PM	#1076 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them. If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers And it's messy af. Have you seen Fargo? Rusty, Hotrodz, Ghostvette and 1 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-02-2019, 08:31 AM	#1080 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,515 Drives: 2013 Nismo 370z Rep Power: 2684391	Timing chains are good to go. Checking VVEL now. Rusty, Hotrodz, madwi and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM