|
I just swapped out my SC-side pulleys for the Vortech high-traction and the larger idler. Wasn't terribly difficult. I fashioned my own spacer out of a 3/4" x 1" x
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-15-2018, 07:27 PM
|
#10 (permalink) |
|
Track Member
 
Join Date: Jun 2015
Location: Granbury, TX
Posts: 550
Drives: '11 SC Blue 7AT
Rep Power: 3367   |
I just swapped out my SC-side pulleys for the Vortech high-traction and the larger idler. Wasn't terribly difficult. I fashioned my own spacer out of a 3/4" x 1" x 1" steel spacer from Lowe's. The shaft is 0.785" and the required spacing is 3/8", just FYI. I cut the spacer to 3/8" and dremelled out the inner surface until it fit on snugly with a little effort. Remember, the idler pulley also needs a 3/8" spacer (or washers, since they don't spin)!!!
I bought a 3/8-24 x 2" bolt for the jackshaft and I used the old jackshaft bolt for the new SC pulley. Also FYI, I had an old 8-rib belt lying around that I used to wrap the SC pulley while loosening the pulley bolt. I can get pictures of the specifics, if desired. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| street /carb legal turbo or supercharger kits | pyrrhus17 | Engine & Drivetrain | 9 | 03-08-2023 05:37 PM |
| 2012-2016 Nismo STILLEN Supercharger Kits on Sale! | Team_STILLEN | Sponsor Classifieds | 0 | 07-12-2016 02:05 PM |
| STILLEN Supercharger 2009-2011 370Z kits - $500 off! | Team_STILLEN | Sponsor Classifieds | 3 | 06-19-2016 01:06 PM |
| [FOR SALE] stilllen supercharger full kit. | btimola | Parts for sale (Private Classifieds) | 22 | 12-14-2014 08:23 PM |
| GTM Performance Engineering stage 2 600hp supercharger kits line-up press release | SAM@GTM | Forced Induction | 305 | 09-27-2012 03:23 PM |
539Likes
Threaded Mode
