Before Installing Stillen Supercharger

Jayhovah · 06-01-2017, 10:14 AM

Quote:

Originally Posted by Felors

Thanks everyone for your inputs. I am probably going to stick with the stock Stillen Surpercharger but might go with the EcuTek tune. I will add the A2A and idler pulley if I want more power later down the road.

I learned from reading on other forums that the belt slippage occurs when upgrading to the 9lb pulley, right? So with the stock, there should be little to no slippage? I am guess the purpose of the idler pulley y'all recommend was to prevent slippage?

Thanks again

You might keep your Stillen warranty this way, but when the bad design and garbage tune blow your motor up you can be assured Nissan will not be coming to your rescue.

Heed the advice of this forum, if you are going to go FI with the Stillen kit do it properly. Research more on the flaws of this kit and you will be horrified that so many people are running it in the out-of-the-box state.

I honestly don't know why anyone on this forum would run this kit that way, having gotten all the information.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
Removing stillen G3 and installing oem	abdulisraddd	Nissan 370Z General Discussions	11	03-01-2016 10:20 PM
Installing FI RTP's (Stillen CBE and G3 setup)	killacam370	Nissan 370Z General Discussions	2	06-10-2015 08:41 PM
Any benefit to installing meth injection on Stillen SC?	Neo187H	Forced Induction	5	04-16-2012 03:28 PM
Problems installing Stillen CBE	Luna	Intake/Exhaust	14	12-19-2010 12:02 PM