|
From charge pipe on the driver side (there is a nipple there) run a line down to where your clutch cylinder is. Install the supplied T fitting at the end
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
12-19-2016, 09:03 PM
|
#1 (permalink) |
|
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3384   |
From charge pipe on the driver side (there is a nipple there) run a line down to where your clutch cylinder is. Install the supplied T fitting at the end of that line, use the remaining two ports on the T fitting, and run one line to the bottom of each wastegate.
Leave one port on the top of each wastegate open to atmosphere (bolt the hose barb on the top, so that debris can't get in). Really no reason for any spiking if everything is plumbed this way.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Twin Turbo Kit- Internal wastegate rattle sound | NOBLE|370Z | Forced Induction | 12 | 03-01-2020 02:24 PM |
| GTM Stage 2 Internal Wastegate Actuators | ColdFire | Forced Induction | 6 | 12-04-2013 11:30 AM |
| Need input on oil cooler plumbing | gomer_110 | Engine & Drivetrain | 7 | 11-28-2013 12:19 AM |
| Noob here with some questions. (Wastegate, Blow off) | Gauge | Forced Induction | 30 | 10-14-2012 12:26 AM |
| HKS Internal Wastegate Actuator | G37sHKS | Forced Induction | 3 | 09-13-2011 04:16 PM |
9Likes
Hybrid Mode
