RJ MFG Supercharger kit Feeler...

B&W_Evader · 12-20-2017, 08:46 AM

Looking like that horse got a little CPR or some shock therapy.

It's really looking like something now.

hustleman222 · 12-20-2017, 10:34 AM

I just ran across this hood and was wondering if it may have the clearances for the Whipple?

scope22 · 12-20-2017, 11:14 AM

Quote:

Originally Posted by hustleman222

I just ran across this hood and was wondering if it may have the clearances for the Whipple?

Wow, never seen before, where did you find it? Link?

cooltoy · 12-20-2017, 01:48 PM

https://www.fasoncarbonfiber.com/product/370z-hood/

shadow85 · 01-02-2018, 06:12 PM

Quote:

Originally Posted by cooltoy

https://www.fasoncarbonfiber.com/product/370z-hood/

Sweet, this something like I was looking for. Anyone got any more pics of it installed?

nomodsjk · 01-03-2018, 10:59 AM

I really like that hood for this application. Hopefully it will work with the SC unit

B&W_Evader · 01-22-2018, 12:34 PM

Over a month since my last post... Wake up horse!

Rusty · 01-22-2018, 01:53 PM

Quote:

Originally Posted by B&W_Evader

Over a month since my last post... Wake up horse!

Elmo370z · 01-22-2018, 10:28 PM

Still talking about the hood. Wait there’s more......

Rusty · 01-22-2018, 10:50 PM

ZDayZ is coming up. It's was to be done at last years ZDayZ.

bullitt5897 · 01-26-2018, 02:16 PM

Hey guys! Sorry I have been away... work, life, my car and designing the new hood in CAD.

Some new pictures surfaced this week on the supercharger kit. I also made a stop this week to RJM to finalize the pulley setup! The new design is super easy to install you guys are going to love it!

So the updates on the kit development:
1. To reduce costs and to make the install as easy as possible RJM is going back to a single belt setup. This means the brackets and tensioner setup can be simplified and reduces the overall size of the kit making good development a lot easier. The tensioner will be about mounted as it sits now. There will be 1 - 2 idler pulleys added and that means two small brackets.

2. The lower plenum in the stack has been produced in billet and complete.
3. The fuel plenum is being finished tonight in billet.
4. The programming for the supercharger manifold, supercharger base plate and throttle body adapters are complete and just needs to be run in the machine.
5. The hood design is coming to a close and it is turning out freaking awesome! The most aggressive and awesome looking hood to date imho!

I will post some pics! And yes we plan to have a few of these at zdayz.

bullitt5897 · 01-26-2018, 02:19 PM

Some teasers:

bullitt5897 · 01-26-2018, 02:22 PM

Not finalized but some teasers of the general design of the hood. Again not finalized we are looking at a lot of design ideas and cues.

shadow85 · 01-28-2018, 03:12 PM

Quote:

Originally Posted by bullitt5897

Not finalized but some teasers of the general design of the hood. Again not finalized we are looking at a lot of design ideas and cues.

Hmm, that is really just alot going on there! Like as in way too much, IMHO.

B&W_Evader · 01-29-2018, 09:12 AM

Quote:

Originally Posted by bullitt5897

Not finalized but some teasers of the general design of the hood. Again not finalized we are looking at a lot of design ideas and cues.

Change those center vents to a cowel induction and integrate a huge filter element into it... That would be bad-a$$.

View Poll Results: What kind of Supercharger kit would you like us to make?
Rotrex C38 based system	54	23.79%
Vortech/Procharger Based Kit	40	17.62%
Whipple Positive Displacement Roots Kit	109	48.02%
I dont want a supercharger.	24	10.57%
Voters: 227. You may not vote on this poll

12-20-2017, 08:46 AM	#1 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 388	Looking like that horse got a little CPR or some shock therapy. It's really looking like something now. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

12-20-2017, 01:48 PM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243725	https://www.fasoncarbonfiber.com/product/370z-hood/ __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-22-2018, 12:34 PM	#7 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 388	Over a month since my last post... Wake up horse! __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

01-22-2018, 10:50 PM	#10 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,579 Drives: 2011 Nismo GM 6M Rep Power: 2684440	ZDayZ is coming up. It's was to be done at last years ZDayZ. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-03-2018, 10:59 AM	#6 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19964	I really like that hood for this application. Hopefully it will work with the SC unit

01-22-2018, 10:28 PM	#9 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,730 Drives: 09 nissan 370z Sp M6 Rep Power: 295380	Still talking about the hood. Wait there’s more......

01-26-2018, 02:16 PM	#11 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3684	Hey guys! Sorry I have been away... work, life, my car and designing the new hood in CAD. Some new pictures surfaced this week on the supercharger kit. I also made a stop this week to RJM to finalize the pulley setup! The new design is super easy to install you guys are going to love it! So the updates on the kit development: 1. To reduce costs and to make the install as easy as possible RJM is going back to a single belt setup. This means the brackets and tensioner setup can be simplified and reduces the overall size of the kit making good development a lot easier. The tensioner will be about mounted as it sits now. There will be 1 - 2 idler pulleys added and that means two small brackets. 2. The lower plenum in the stack has been produced in billet and complete. 3. The fuel plenum is being finished tonight in billet. 4. The programming for the supercharger manifold, supercharger base plate and throttle body adapters are complete and just needs to be run in the machine. 5. The hood design is coming to a close and it is turning out freaking awesome! The most aggressive and awesome looking hood to date imho! I will post some pics! And yes we plan to have a few of these at zdayz. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
[FOR SALE] [Feeler] GTM Stage 1.5 Supercharger Kit	AntiVenom	Parts for sale (Private Classifieds)	19	06-01-2016 02:49 PM
Available soon! FEELER	Rayzz	Parts for sale (Private Classifieds)	7	06-23-2015 01:00 PM
[FOR SALE] Feeler	DEpointfive0	Parts for sale (Private Classifieds)	27	01-13-2015 12:18 PM