Topgunz - air to air upgrade

URBiN~HURMiT · 10-17-2017, 07:06 PM

Quote:

Originally Posted by milkcow500

It uses the same mounting bracket as the V3 and has already been test fitted on another vehicle.

Edit: You are looking at the dimensions of the inlets/outlets by the way. I don't think they list the actual dimensions of the blowers, but you can find pics online. The V7 is slightly larger, but has the same mounting bolts.

As long as you know [and the V7 has successfully been integrated to the Stillen kit] ... the V7 is physically larger than the V3...and is overkill, unless you have a built motor and are really shooting for the moon power wise.
From what I've researched, the V7 is less efficient at lower RPMs.

The mounting bracket does work - it's the other clearances and belt alignments that you'll have to address.

I did attempt to upgrade the Stillen with a V2-TI a few years back [similar in size to the V7] and ran into some issues here.

This was before TogGunZ came out with his Stillen A2A kit.
TopGunZ bought my Stillen Kit to begin his design project.
Which has been 'Super' Successful by all accounts...Kudos.

milkcow500 · 10-17-2017, 07:21 PM

Quote:

Originally Posted by URBiN~HURMiT

As long as you know [and the V7 has successfully been integrated to the Stillen kit] ... the V7 is physically larger than the V3...and is overkill, unless you have a built motor and are really shooting for the moon power wise.
From what I've researched, the V7 is less efficient at lower RPMs.

The mounting bracket does work - it's the other clearances and belt alignments that you'll have to address.

I did attempt to upgrade the Stillen with a V2-TI a few years back [similar in size to the V7] and ran into some issues here.

This was before TogGunZ came out with his Stillen A2A kit.
TopGunZ bought my Stillen Kit to begin his design project.
Which has been 'Super' Successful by all accounts...Kudos.

Yeah, I actually didn't go this route at first because I heard the V2 had some issues. I guess it may have been you people were discussing.

There are certain properties to the V7 that are better than the V3 and there are multiple ways to fix the efficiency and lower end issues. Belt alignment is fine though. My only fear is that I may run into belt slip issues with this setup. I'll be posting a new thread once I get my car back, but it will be interesting to see how well the stock block handles.

URBiN~HURMiT · 10-17-2017, 07:52 PM

Quote:

Originally Posted by milkcow500

Yeah, I actually didn't go this route at first because I heard the V2 had some issues. I guess it may have been you people were discussing.

There are certain properties to the V7 that are better than the V3 and there are multiple ways to fix the efficiency and lower end issues. Belt alignment is fine though. My only fear is that I may run into belt slip issues with this setup. I'll be posting a new thread once I get my car back, but it will be interesting to see how well the stock block handles.

Go for it !!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM