Topgunz - air to air upgrade

Pauly Z

Where did you get the pulley for the serpentine side?

Sent from my SM-N920V using Tapatalk

__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

JWillis72

I didn't, I only changed the supercharger pulley, I got that from Vortech.

TBatt

What size did you use and what was the boost?

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

JWillis72

I broke the first supercharger with a 2.75 then changed to a 3.0 for the second one, it was around 10psi but not 100 percent positive. I have long tube headers on my car so it's going to be less than others will see with cats. I don't know that over spinning the supercharger caused the first one to go but I wasn't chancing it. At the track my car sees red line hundreds of times in a weekend so it takes a lot more beating than most street cars.