Nissan 370Z Forum
Page 73 of 187 « First 23637172 73 747583123173 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Topgunz - air to air upgrade (http://www.the370z.com/forced-induction/110925-topgunz-air-air-upgrade.html)

Kamillio 09-14-2016 01:04 PM
Quote:
Originally Posted by TBatt (Post 3552544)
That will be my next mod, hopefully this winter.


Have you been able to hold the power when WOT switching from 3rd to 4th, or 4th to 5th? Or has the clutch slipped some


Sent from my iPhone using Tapatalk

future370zzz 09-14-2016 01:16 PM
Quote:
Originally Posted by TopgunZ (Post 3552535)
Thats what flex fuel is for.
I get it on flex fuel cars that are designed for using gas and e85 but have heard issues with seals/gaskets and corrosion from additional water on retrofits. This might just be with older cars using steel and cork materials. Not 100% sure as facts and myth are usually mixed in.

Jazz8560 09-14-2016 02:11 PM
Quote:
Originally Posted by TBatt (Post 3552542)
Is that 9 psi measured or are you just going on the fact that you have the 9 psi pulley? I'm having issues with low boost using the 9 psi pulley so I'm curious what I should be seeing with the 9 psi pulley and a2a kit.
Yes sir... measured.

TopgunZ 09-14-2016 03:57 PM
I ran nothing but e85 for 3 years with zero issues. Any newer car has all ethanol resistant material as most gas has e in it anyway.

StillenZ84 09-14-2016 06:00 PM
Quote:
Originally Posted by Jazz8560 (Post 3552581)
Yes sir... measured.
Sounds about right. Only thing I have on you is the SI impeller and extra tensioner pulley up front and I am seeing 12.3 psi. Was seeing a constant 11 psi without the extra pulley and gained over a psi just from the extra wrap from the additional pulley up front. Working with Sebz to get the tune right with my additional boost.

Jazz8560 09-14-2016 07:23 PM
Quote:
Originally Posted by StillenZ84 (Post 3552687)
Sounds about right. Only thing I have on you is the SI impeller and extra tensioner pulley up front and I am seeing 12.3 psi. Was seeing a constant 11 psi without the extra pulley and gained over a psi just from the extra wrap from the additional pulley up front. Working with Sebz to get the tune right with my additional boost.
What kind of numbers are you doing bud? I'm really interested in that extra pulley as well.

StillenZ84 09-15-2016 12:16 AM
Quote:
Originally Posted by Jazz8560 (Post 3552756)
What kind of numbers are you doing bud? I'm really interested in that extra pulley as well.
That's the bad thing is I still haven't been on the dyno. It's killing me not knowing my numbers and I know it's killing Topgunz. Good dynos here in OK are hard to come by. I'm 100% sure I'm over 500whp. I can hang with 650hp CTSVs, 500 plus Vettes, 335is, I beat stock hellcats, and can beat 600cc bikes. Car is so much fun to drive.

BOLIO 671 09-15-2016 05:33 AM
Quote:
Originally Posted by TopgunZ (Post 3552415)
The si from vortech is $700 and a month lead time. You can also upgrade to the high speed bearings and run a smaller sc pulley to gain another 25 to 30whp.

And running ethanol obviously helps a lot.
Thnx for the tips Topz.....Wish we had Ethanol out here....I don't ever see that as an option....it's either 91 @ the pump or Race Gas.....

BOLIO 671 09-15-2016 07:07 AM
Quote:
Originally Posted by StillenZ84 (Post 3552880)
That's the bad thing is I still haven't been on the dyno. It's killing me not knowing my numbers and I know it's killing Topgunz. Good dynos here in OK are hard to come by. I'm 100% sure I'm over 500whp. I can hang with 650hp CTSVs, 500 plus Vettes, 335is, I beat stock hellcats, and can beat 600cc bikes. Car is so much fun to drive.
I'm Subd to ur channel......Ur car is Hella quick....and hangs with the back to back runs....ur recent runs have been awesome...

nic370 09-15-2016 12:28 PM
Quote:
Originally Posted by BOLIO 671 (Post 3552956)
I'm Subd to ur channel......Ur car is Hella quick....and hangs with the back to back runs....ur recent runs have been awesome...
You got a link I'd like to see that

Sent from my SM-G920F using Tapatalk

future370zzz 09-15-2016 01:22 PM
https://www.youtube.com/watch?v=WjltYX0OLM0

Saw the other vids too. Surprised you beat the turbo RSX and surprised the 335i kept up for a little bit.

nic370 09-15-2016 03:20 PM
Quote:
Originally Posted by future370zzz (Post 3553187)
https://www.youtube.com/watch?v=WjltYX0OLM0

Saw the other vids too. Surprised you beat the turbo RSX and surprised the 335i kept up for a little bit.
Nice

Sent from my SM-G920F using Tapatalk

StillenZ84 09-15-2016 03:20 PM
Quote:
Originally Posted by BOLIO 671 (Post 3552956)
I'm Subd to ur channel......Ur car is Hella quick....and hangs with the back to back runs....ur recent runs have been awesome...
Thanks man. Yeah I just added like 15 videos the last few days. Yall should def check out what Topgunz air to air kit is capable of.

https://www.youtube.com/channel/UCoe...AgOT4KLF10zRDw

nic370 09-15-2016 03:47 PM
Quote:
Originally Posted by StillenZ84 (Post 3553247)
Thanks man. Yeah I just added like 15 videos the last few days. Yall should def check out what Topgunz air to air kit is capable of.

https://www.youtube.com/channel/UCoe...AgOT4KLF10zRDw
Yeah man looks good
My kit is sat in the house at the moment will get round to it soon
Cheers

Sent from my SM-G920F using Tapatalk

future370zzz 09-15-2016 06:57 PM
What tires are you on? It's not getting swirly at 500whp? I got hankook v12 evos and they get swirly with the small amount of power I have at full takeoff. Can't image at 500whp especially on the dig run with the evo.


All times are GMT -5. The time now is 07:24 PM.
Page 73 of 187 « First 23637172 73 747583123173 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2