Nissan 370Z Forum
Page 63 of 187 « First 13536162 63 646573113163 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Topgunz - air to air upgrade (http://www.the370z.com/forced-induction/110925-topgunz-air-air-upgrade.html)

Jayhovah 08-02-2016 10:38 AM
Quote:
Originally Posted by TBatt (Post 3528468)
Will the FI tow bar fit around the intercooler on the A2A setup?
370Z Front Tow Bar, Fast Intentions
On my Gamma V3 kit they just use spacers to attach the factory tow bar.
In my particular case the spacers weren't big enough, nor could I grab enough threads on the inner 4 studs.... However, I did make up my own spacer/hardware setup that did work and spaced my factory tow bar out about 9mm. The bumper and foam reinforcement seem to still fit just fine. =)

TBatt 08-02-2016 12:26 PM
Quote:
Originally Posted by Jayhovah (Post 3528476)
On my Gamma V3 kit they just use spacers to attach the factory tow bar.
In my particular case the spacers weren't big enough, nor could I grab enough threads on the inner 4 studs.... However, I did make up my own spacer/hardware setup that did work and spaced my factory tow bar out about 9mm. The bumper and foam reinforcement seem to still fit just fine. =)
That is great to know. I should have done another check while I had everything apart last night.

StillenZ84 08-02-2016 01:50 PM
Quote:
Originally Posted by TBatt (Post 3528468)
Will the FI tow bar fit around the intercooler on the A2A setup?
370Z Front Tow Bar, Fast Intentions
I believe that JWillis has the FI tow bar installed. Maybe he can give you better insight on the fitting.

JWillis72 08-02-2016 06:10 PM
Quote:
Originally Posted by StillenZ84 (Post 3528629)
I believe that JWillis has the FI tow bar installed. Maybe he can give you better insight on the fitting.


Mine isn't Topgunz kit but I'm sure you will have more than enough room. I just took the pics off my phone but I will find you one.


Sent from my iPhone using Tapatalk

JWillis72 08-02-2016 06:14 PM
1 Attachment(s)
Attachment 115893

JWillis72 08-02-2016 06:41 PM
That cooler is the same one Topguns uses in his kits.


Sent from my iPhone using Tapatalk

TBatt 08-03-2016 09:35 AM
Quote:
Originally Posted by JWillis72 (Post 3528791)
That cooler is the same one Topguns uses in his kits.


Sent from my iPhone using Tapatalk
Fantastic! Thanks!!!

milkcow500 08-05-2016 08:54 AM
I just got in my Tial. The v clamp seems like it's too small for the tial flange (adapter) and the flange on the T pipe. Am I doing something wrong or is the clamp too small? http://uploads.tapatalk-cdn.com/2016...f76e772b6c.jpghttp://uploads.tapatalk-cdn.com/2016...9b429b9da0.jpghttp://uploads.tapatalk-cdn.com/2016...e6420c90a9.jpghttp://uploads.tapatalk-cdn.com/2016...2aad07491c.jpg

Pauly Z 08-05-2016 09:17 AM
Quote:
Originally Posted by milkcow500 (Post 3530557)
I just got in my Tial. The v clamp seems like it's too small for the tial flange (adapter) and the flange on the T pipe. Am I doing something wrong or is the clamp too small? http://uploads.tapatalk-cdn.com/2016...f76e772b6c.jpghttp://uploads.tapatalk-cdn.com/2016...9b429b9da0.jpghttp://uploads.tapatalk-cdn.com/2016...e6420c90a9.jpghttp://uploads.tapatalk-cdn.com/2016...2aad07491c.jpg
You have the wrong clamp. You need the 50mm one.

Sent from my SM-N920V using Tapatalk

milkcow500 08-05-2016 09:22 AM
What was the part number for the clamp you used? This is what I got. I guess it's 38mm? http://www.verociousmotorsports.com/...Clamp-Assembly

Sent from my SM-N910V using Tapatalk

Pauly Z 08-05-2016 09:32 AM
Quote:
Originally Posted by Pauly Z (Post 3530588)
You have the wrong clamp. You need the 50mm one.

Sent from my SM-N920V using Tapatalk
Yes the QRJ is smaller. You need to go to the older valve section and get a 50mm one.

Sent from my SM-N920V using Tapatalk

milkcow500 08-05-2016 09:43 AM
Got it. Looks like I'll have to source one locally. Did you have to put an oring or anything between the flanges before clamping them together?

Sent from my SM-N910V using Tapatalk

Pauly Z 08-05-2016 09:50 AM
Quote:
Originally Posted by milkcow500 (Post 3530609)
Got it. Looks like I'll have to source one locally. Did you have to put an oring or anything between the flanges before clamping them together?

Sent from my SM-N910V using Tapatalk
No, not needed

Sent from my SM-N920V using Tapatalk

milkcow500 08-05-2016 10:34 AM
Thanks man. I just found the correct one on Amazon and I can get it same day. Almost had the damn thing welded because no one carries 2" V bands. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

bewhitey 08-06-2016 04:10 PM
Just wanted to show a pic of TopgunZ kit for people who are curious, I have the pieces setting how they should go together .... TopgunZ let me know if I have something out of place

http://i52.photobucket.com/albums/g7...0354608737.jpg


All times are GMT -5. The time now is 05:25 AM.
Page 63 of 187 « First 13536162 63 646573113163 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2