So I just removed the cooler out of the manifold in preparation for going a2a
Took the bolts out pulled hard and it slid right out in one hit
My manifold is off the car at the moment

Sent from my SM-G920F using Tapatalk
http://uploads.tapatalk-cdn.com/2016...129f9c026b.jpg

http://uploads.tapatalk-cdn.com/2016...248ca0fa8b.jpg

http://uploads.tapatalk-cdn.com/2016...129fd776a5.jpghttp://uploads.tapatalk-cdn.com/2016...ee0a40102c.jpg

I am about to install the Stillen SC and Topgunz's A2A upgrade kit.
I have the Stillen G3 intake, they were already installed when I bought my Z.
Question what are you guys using to trim/cut the radiator
Support with. I understand it will need this for the intercooler tubes to pass thru.
I want to have all the tools ready when my kit arrives.

Thanks

I used a dremel... The support is pretty flimsy plastic.

Sent from my Nexus 6 using Tapatalk

Mines on and going on dyno tomorrow!!!

https://s17.postimg.org/rf1l2fzqn/Sc...829_183255.png

https://s17.postimg.org/mh9ykq03j/Sc...829_183334.png

Install looks great! The shop that did it called me and had just one question. It was in regards to the washer reservoir neck hitting the Y pipe. I walked them through that. Other than that they told me the install was very straight forward, easy and everything fit up perfectly!

Love how the Tial lets you select a color and those colors match the 370 family.

Good luck on the Dyno tomorrow! What are you mods other than the A2A kit?

Overall Size 20" X 15.25" X 3.50"
Core Size 18.48 X 9.00 X 3.50
:hello:

I used a pair of channel locks and just tore the plastic apart. It is really pretty soft and easy to work with.

I guess the Godzilla approach has its merits. I am going for as clean of an install as possible, but thanks. Going to use a Dremel tool I have decided.

They were able to use a silicon flex pipe to solve the reservoir neck.

Other upgrades are:

850cc injectos
9lb pulley
Vortech upgraded impeller
AAM oil cooler
Berk HFC
HKS hi-flow exhaust


TopGunz - what do you estimate WHP to be? I dyno'd 449 at the wheels without a2a,and impeller on 650cc injectors

And thx, yes the blue TIAL BOV goes perfectly!

Are you on EcuTech with the 4bar map sensor?

Hey, that was my idea! At least now I know it will work.

Thanks for that TopgunZ.
:driving:

No,.

Uprev

Anyone got dyno sheets ?
Interested in intake Temps with the new set up

Sent from my SM-G920F using Tapatalk