Nissan 370Z Forum
Page 14 of 187 « First 41213 14 15162464114 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Topgunz - air to air upgrade (http://www.the370z.com/forced-induction/110925-topgunz-air-air-upgrade.html)

BOLIO 671 04-14-2016 08:23 AM
Quote:
Originally Posted by TopgunZ (Post 3456664)
One thing I forgot to mention is that the MAF voltage readings were exactly the same from side to side. This is important for proper idle. That means the Y pipe is split perfect so both sides, both throttle bodies are receiving the same amount of air.

I forgot to tell the tuner to take a screenshot or I should have snapped a pic of the laptop with my phone of the Maf readings. I am going to redyno and I will do it then.
On this note....since the MAF's are post blower and right before the Throttle Chambers then we're getting accurate AIT's now versus the Stillen set up which is pre-blower right? Were u able to log ur AIT'S on the dyno run?

TopgunZ 04-14-2016 08:51 AM
Correct. I haven't logged it this time. I am in the middle of swapping back to the 8psi pulley and 34/30 tooth cog setup. When that's done I will make a video of the AITs on the road. The last time I did they never went more than 10* above ambient. But I was only on 9psi. Now that im around 13 they might be slightly higher. But nothing even close to 200* like the current setup..lol..

jwick 04-14-2016 10:50 AM
You were getting 200 IATs with the Stillen kit?

milkcow500 04-14-2016 10:59 AM
Seb posted a video a while ago showing temps near 200 @ WOT with the frozenboost installed.

TopgunZ 04-14-2016 11:27 AM
Quote:
Originally Posted by milkcow500 (Post 3459267)
Seb posted a video a while ago showing temps near 200 @ WOT with the frozenboost installed.
True story

Maddog 04-14-2016 12:13 PM
He did and yet the coolant was at 0 degrees Celsius

jwick 04-14-2016 01:29 PM
Quote:
Originally Posted by milkcow500 (Post 3459267)
Seb posted a video a while ago showing temps near 200 @ WOT with the frozenboost installed.
:eek2::bowrofl::bowrofl::bowrofl:

JWillis72 04-14-2016 06:41 PM
Who got the first kit?

TopgunZ 04-14-2016 07:44 PM
Evan

omG37S 04-14-2016 07:45 PM
Does the kit come with instructions?

Sent from my SM-N920V using Tapatalk

TopgunZ 04-14-2016 07:46 PM
It will yes.

BOLIO 671 04-14-2016 08:10 PM
Quote:
Originally Posted by TopgunZ (Post 3459208)
Correct. I haven't logged it this time. I am in the middle of swapping back to the 8psi pulley and 34/30 tooth cog setup. When that's done I will make a video of the AITs on the road. The last time I did they never went more than 10* above ambient. But I was only on 9psi. Now that im around 13 they might be slightly higher. But nothing even close to 200* like the current setup..lol..
Awesome......:happydance:

Btw Topz...when u did ur dyno run, u only had the 9psi pulley as the only upgrade to the Air to Air? Everything else was in the out of the box Stillen format ryt?

TopgunZ 04-14-2016 08:34 PM
No. I have the Si trim that is good for 2psi more. I was spinning my sc at the same speed as the 9psi or 2.75".

StillenZ84 04-15-2016 11:50 AM
1 Attachment(s)
Got my kit today! Now for the install this weekend!

StillenZ84 04-16-2016 10:58 PM
2 Attachment(s)
It is all coming together. Everything has fit really nice and only a few minor adjustments have been made. Hopefully I can finish up the major things tomorrow and get everything back together.


All times are GMT -5. The time now is 12:51 AM.
Page 14 of 187 « First 41213 14 15162464114 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2