![]() |
I made some youtube vids. After dropping the diff, I drilled a couple holes in the rubber with a paddle bit. The crew type binds and then either throws your
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) |
A True Z Fanatic
Join Date: Jun 2013
Location: Houston
Posts: 1,449
Drives: 2010 Nismo
Rep Power: 64 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I made some youtube vids. After dropping the diff, I drilled a couple holes in the rubber with a paddle bit. The crew type binds and then either throws your or break in half. Then I used a bottle jack and a pipe and placed it between the subframe and the bushing and jacked'pushed the rubber out (it tore mostly out and I used a sawzaw to cut the the rest of the way out). I then took the sawzaw and cut the metal out. Make sure you cut all the way through the metal ring ir it wont come out. Once cut thought, I used a flathead and pried it out. You can see the metal ring in the last vid IRRC. It's a series of 9 vids I think
https://www.youtube.com/watch?v=AAtgvAYw-8Q YzGyz Last edited by YzGyz; 04-06-2017 at 11:53 PM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
First top mount single turbo 370Z | 98intrigue | Forced Induction | 1279 | 02-14-2017 08:51 AM |
Single exhaust & single turbo | 6mt370 | Forced Induction | 16 | 12-18-2015 10:11 AM |
Twin Turbo vs. Single Turbo V6: A Dissertation | Mike@GTM | Forced Induction | 115 | 08-14-2014 09:04 PM |
Going FI with VSR Motorsports top mount single turbo | regulator11 | Forced Induction | 32 | 05-20-2013 08:04 AM |
Jtran Studios low mount single turbo setup completed! | cdoxp800 | Forced Induction | 149 | 01-10-2012 03:55 PM |