BP V 2.0 turbo kits...ROUND 3 place your order now

solidus · 08-19-2016, 11:51 AM

Quote:

Originally Posted by overtureZ

Is the installation doable on my own? I have a pretty good mechanically skill base from working in a shop as a technician for a little over a year.

I can do alot but I'm not a mechanic. I did my install with help from a friend that owns a shop. Everything I did was made easier with the lift but it was all 100% doable on stands at home. I made a few slip ups here and there with the caveat that my profession involves guns and not wrenches. If you get the kit, take your time, double check connections, invest in a turbo blanket, wrap everything including your wiring harness and then do a triple check on EVERYTHING you touched. Do all that and you wake up boosted with an awesome kit that will draw looks from the spooling sound it makes on the road and people looking underneath will be in awe of Sashas work on the manifold and recirculation. All this.

jax4557 · 08-22-2016, 01:38 PM

I think my tune is finally done, with ecutek traction control and without is night and day.

I love this kit sooo much!

https://youtu.be/iAyaED47xBg

https://youtu.be/iwuA6RpZlMY

1cleanZ · 08-23-2016, 07:50 AM

Quote:

Originally Posted by jax4557

I think my tune is finally done, with ecutek traction control and without is night and day.

I love this kit sooo much!

https://youtu.be/iAyaED47xBg

https://youtu.be/iwuA6RpZlMY

You running E85 or 93? You have quite a bit of detonation

jax4557 · 08-24-2016, 12:00 AM

Quote:

Originally Posted by 1cleanZ

You running E85 or 93? You have quite a bit of detonation

If I have an issue with my tune I am all ears.

I am running flex fuel, these videos were at E81. Are your referring to the backfire? That was during a flat foot shift.

overtureZ · 08-24-2016, 08:27 AM

What is need besides the full turn key kit?

1 Oil Cooler

2 Upgraded clutch??

3 Oil pan spacer??

Just curious

Chuck33079 · 08-24-2016, 08:37 AM

Quote:

Originally Posted by overtureZ

What is need besides the full turn key kit?

1 Oil Cooler

2 Upgraded clutch??

3 Oil pan spacer??

Just curious

Oil cooler and spacer is included. You'll need the clutch (and csc, flywheel also recommended), gauges, boost controller, a mile of header wrap, a radiator if you live in a hot climate, and a good tuner.

jwick · 08-24-2016, 09:49 AM

Quote:

Originally Posted by Chuck33079

Oil cooler and spacer is included. You'll need the clutch (and csc, flywheel also recommended), gauges, boost controller, a mile of header wrap, a radiator if you live in a hot climate, and a good tuner.

^THIS^

Chuck's physical help was key to my install so he has first hand experience.

solidus · 08-24-2016, 10:35 AM

Just a tip. If you plan to run an oil temp sensor its an awesome idea to take the spacer to a machine shop as soon as you get it and have them drill it and tap for 1/8 npt. Another piece of cheap insurance is a turbo blanket. I still have to tap mine but I got the turbo blanket post install after melting my trans harness. My fault for not raising the harness high enough but the amount of heat thats produced by the turbo is incredible and the blanket would've saved me tons of worry and heartache. (New harness 1900.00 /splicing is free but a pain.)

Jayhovah · 08-24-2016, 11:50 AM

Quote:

Originally Posted by solidus

Just a tip. If you plan to run an oil temp sensor its an awesome idea to take the spacer to a machine shop as soon as you get it and have them drill it and tap for 1/8 npt. Another piece of cheap insurance is a turbo blanket. I still have to tap mine but I got the turbo blanket post install after melting my trans harness. My fault for not raising the harness high enough but the amount of heat thats produced by the turbo is incredible and the blanket would've saved me tons of worry and heartache. (New harness 1900.00 /splicing is free but a pain.)

If the sensor is attached directly to the pan spacer, are you certain it will be submerged in the oil? I would worry that the oil level would be below the sensor.

solidus · 08-24-2016, 05:25 PM

Quote:

Originally Posted by Jayhovah

If the sensor is attached directly to the pan spacer, are you certain it will be submerged in the oil? I would worry that the oil level would be below the sensor.

The kit comes with a JWT spacer, the difference between that and the AAM spacer is the 1/8 npt port, so I'm pretty sure it works. Thats also where the AN fittings attach to the spacer.

Jayhovah · 08-24-2016, 06:12 PM

Quote:

Originally Posted by solidus

The kit comes with a JWT spacer, the difference between that and the AAM spacer is the 1/8 npt port, so I'm pretty sure it works. Thats also where the AN fittings attach to the spacer.

And they are meant for a temp sensor? It would make sense for a turbo oil return (which is supposed to be above the oil level in the pan for proper drainage)... which is why I am questioning that location for an oil temp sensor since it may not be submerged in the oil.

Also.. would you want the oil temp sensor in the pan? Or in the pressurized feed just after the oil cooler?

I haven't installed one of these, so I am really just thinking outloud here...

xdragus · 08-24-2016, 09:17 PM

Anyone know if this would work with the 2016-2017 stock nismo exhaust or I'd have to switch out to fast intentions?

jwick · 08-25-2016, 07:57 AM

Quote:

Originally Posted by xdragus

Anyone know if this would work with the 2016-2017 stock nismo exhaust or I'd have to switch out to fast intentions?

Not directly from Sasha it won't but you could have the downpipe custom fabricated to make it work. I had to do that to get it to fit with my Fast Intentions exhaust since this kit isn't 'made' for a G.

It's that or buy an exhaust that fits the kit directly.

solidus · 08-25-2016, 09:31 AM

I shot out an email to Sasha but can anybody give a part no. and source for the air filter? Turns out my heat damage extended to the top of the filter. It's ugly

jwick · 08-25-2016, 11:38 AM

That's really odd.

Sorry, no help on the filter. I have a different compressor cover.

08-22-2016, 01:38 PM	#602 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 10	I think my tune is finally done, with ecutek traction control and without is night and day. I love this kit sooo much! https://youtu.be/iAyaED47xBg https://youtu.be/iwuA6RpZlMY YzGyz, SwissCheese and PongSanity like this. Last edited by jax4557; 08-22-2016 at 01:45 PM.

08-25-2016, 11:38 AM	#615 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	That's really odd. Sorry, no help on the filter. I have a different compressor cover. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM

08-24-2016, 08:27 AM	#605 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	What is need besides the full turn key kit? 1 Oil Cooler 2 Upgraded clutch?? 3 Oil pan spacer?? Just curious

08-24-2016, 10:35 AM	#608 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10080	Just a tip. If you plan to run an oil temp sensor its an awesome idea to take the spacer to a machine shop as soon as you get it and have them drill it and tap for 1/8 npt. Another piece of cheap insurance is a turbo blanket. I still have to tap mine but I got the turbo blanket post install after melting my trans harness. My fault for not raising the harness high enough but the amount of heat thats produced by the turbo is incredible and the blanket would've saved me tons of worry and heartache. (New harness 1900.00 /splicing is free but a pain.)

08-24-2016, 09:17 PM	#612 (permalink)
xdragus Base Member Join Date: Aug 2015 Location: toronto Posts: 47 Drives: '17 PW Nismo Rep Power: 9	Anyone know if this would work with the 2016-2017 stock nismo exhaust or I'd have to switch out to fast intentions?