CJM VQ Turbo Manifolds

Originally Posted by phunk

Preliminary Pricing Plans:

Manifold Set: $2350
Manifold-To-Turbine Clamp Pair: $50 (required unless you have them already)
Re-circulated Downpipe Set: $995 (Any size 2.5" - 3.0")
Open-Dump Downpipe Set: $945 (Any size 2.5" - 3.0")
Additional o2 Bungs: $10 Each

Driver-Side Motor Mount Bracket: $TBD$
Driver-Side Heater Pipe: $TBD$
Oil Manifold & Line Kit: $TBD$
Water Line Kit: $TBD$

Wastegates, Tial MV-S, Pair: $550

Turbos- There are many compatible turbo options. Straight Garretts, HTAs, Xona Rotors, etc. But just to give a couple examples:
GT2860RS, Pair w/ Turbine Housings: $2330
GTX3076R, Pair w/ Turbine Housings: $3840
GTX3582R, Pair w/ Turbine Housings: $4700

Turbo compressor housings for larger turbos will likely need to have the outlet cut off with a forward facing elbow welded on. This is rather common for turbo kits in cars with tight engine bays. We would perform this for turbos purchased from us.

So a combination of manifolds, GT28 turbos, open dump downpipes, wastegates, is adding up to $6175. This is not yet including the heater pipe and motor mount bracket, or turbo oil and coolant line kit.

Or if looking for a 1000-1100rwhp combo with the GTX3076R, $7685 for the same combo.