Custom hood vents

Joepro · 11-19-2013, 11:23 AM

Quote:

Originally Posted by Wabbyyy

Sorry but not a big fan. Just buy an aftermarket CF hood.

I hate CF, and by the time I buy a CF and paint it, big money on a hood that does not vent and no fitment issues with OEM hood... and most they are too flashy and heavier, this is simple and clean, one could even paint the mesh body color to blend it. To each their own! Not to mention cost effective. Its in my to do list! I guess rust was the wrong terminology, it will build corrosion here in PA if your not careful, bt true it will not rust like steel.

future370zzz · 11-19-2013, 02:39 PM

Quote:

Originally Posted by synolimit

Hoods aluminium, it can't rust.

Street "racing" I can't get over 218 degrees. I'd say thats pretty good data with only the OEM oil cooler.

What were your temps hitting when you were "racing" before the hood mod?

synolimit · 11-19-2013, 08:06 PM

Quote:

Originally Posted by future370zzz

What were your temps hitting when you were "racing" before the hood mod?

What I'm talking about was a trip down to southern ohio, kinda like the dragon in Virginia. I hadn't gone down there before or did that much fast driving before the mod. But I remember when bedding in my brakes I was over 220 with the hood stock. And from everyone else who canyon runs I've read they can get up to 260.

Minato · 11-19-2013, 09:10 PM

Quote:

Originally Posted by Joepro

I hate CF, and by the time I buy a CF and paint it, big money on a hood that does not vent and no fitment issues with OEM hood... and most they are too flashy and heavier, this is simple and clean, one could even paint the mesh body color to blend it. To each their own! Not to mention cost effective. Its in my to do list! I guess rust was the wrong terminology, it will build corrosion here in PA if your not careful, bt true it will not rust like steel.

Aluminum will corrode and form an aluminum oxide which prevents further corrosion, you will be fine.

Kingbaby · 12-23-2013, 01:20 AM

just thinking what a mustang gt 500 vent would look like on a Z?

KB2 · 02-15-2014, 01:09 PM

I'm a big fan. Might look into this myself

Stormtroopr · 06-12-2017, 08:04 AM

Anybody tried to install a C7 Z06 hood vent on a 370Z ?

scope22 · 06-12-2017, 10:54 AM

What is wrong with you?

Quote:

Originally Posted by Stormtroopr

Anybody tried to install a C7 Z06 hood vent on a 370Z ?

stansens · 06-12-2017, 07:16 PM

I think the work you did is good quality. A bit too "obvious" for my likes but that doesn't make it bad. It had to take courage no doubt. I had thought once thought of modifying the lip where the hood meets the windshield wiper tray with some slots and black mesh but didn't get around to it yet. Strictly for invisible cooling.
All in all good job!!

BBQdDude · 06-13-2017, 10:54 AM

Quote:

Originally Posted by synolimit

What I'm talking about was a trip down to southern ohio, kinda like the dragon in Virginia. I hadn't gone down there before or did that much fast driving before the mod. But I remember when bedding in my brakes I was over 220 with the hood stock. And from everyone else who canyon runs I've read they can get up to 260.

Props for what you did. I keep thinking about this but no balls to cut lol.

Try 33>374 in hocking. 18 miles of bliss for sure

.

synolimit · 06-13-2017, 10:01 PM

Added A few since 2013...

nomodsjk · 06-14-2017, 09:31 AM

This could be a good idea for me or anyone else who buys the whipple kit when it gets finished.

ChaseZ · 06-14-2017, 10:18 AM

Quote:

Originally Posted by nomodsjk

This could be a good idea for me or anyone else who buys the whipple kit when it gets finished.

I cut some smaller vents into mine same time as the SC install and could cook a chicken over the heat that comes out of them.

barncobob · 06-14-2017, 10:53 AM

what about when it rains?

Nixin · 06-14-2017, 08:23 PM

Kudos to you guys cutting into your hoods!

06-13-2017, 10:01 PM	#101 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Added A few since 2013... God-Speed, Hotrodz, Jayhovah and 2 others like this. __________________ 13 370z- Last edited by synolimit; 06-13-2017 at 10:04 PM.

06-14-2017, 09:31 AM	#102 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	This could be a good idea for me or anyone else who buys the whipple kit when it gets finished. ChaseZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hood Vents?	VaGntlmn	Exterior & Interior	38	08-08-2017 07:18 PM
WTB CF hood with vents	Alexshen1	Northern California Region	0	09-08-2012 08:26 PM
[WTB] CF hood with vents	Alexshen1	Parts for sale (Private Classifieds)	0	09-08-2012 08:18 PM
stock hood and vents	van_fc3s	Exterior & Interior	18	06-24-2011 01:30 AM
Carbon hood with vents	JvKintheUSA	Exterior & Interior	12	02-12-2010 10:31 AM

02-15-2014, 01:09 PM	#96 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	I'm a big fan. Might look into this myself

06-12-2017, 08:04 AM	#97 (permalink)
Stormtroopr Base Member Join Date: Apr 2016 Location: Paris, FRANCE Posts: 30 Drives: 16 nismo 370Z Wh M6 Rep Power: 9	Anybody tried to install a C7 Z06 hood vent on a 370Z ?

06-12-2017, 07:16 PM	#99 (permalink)
stansens Base Member Join Date: Nov 2015 Location: toronto, canada Posts: 144 Drives: 2016, 370z Rep Power: 192	I think the work you did is good quality. A bit too "obvious" for my likes but that doesn't make it bad. It had to take courage no doubt. I had thought once thought of modifying the lip where the hood meets the windshield wiper tray with some slots and black mesh but didn't get around to it yet. Strictly for invisible cooling. All in all good job!!

06-14-2017, 10:53 AM	#104 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 589	what about when it rains?

06-14-2017, 08:23 PM	#105 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19832	Kudos to you guys cutting into your hoods!