Rear Foglight - Running light AND brake light

z w/ backseat · 12-05-2012, 03:35 PM

Quote:

Originally Posted by Baer383

All you need to do is use a brake light/tail light socket from a Honda Pilot.
It still has the same shape as the OE one no grinding

What year? I am assuming 2008 or later. All I can find is an overall harness with 3 sockets. 2 of the 3 sockets on that harness seem they would work. I am starting my projects this winter and would like to do this when I put in the light.

Baer383 · 12-05-2012, 03:41 PM

Quote:

Originally Posted by z w/ backseat

What year? I am assuming 2008 or later. All I can find is an overall harness with 3 sockets. 2 of the 3 sockets on that harness seem they would work. I am starting my projects this winter and would like to do this when I put in the light.

I'm not sure of the year but it is a newer SUV ,newer than 08.

z w/ backseat · 12-05-2012, 03:45 PM

Thanks, I'll do some digging to see what diagrams I can find with a part number

z w/ backseat · 12-05-2012, 04:00 PM

Looks like a full wire assembly
33502-SZA-A02 (2009 - 2012)
(2) 7443 sockets
(1) 194 socket
are included on that assembly

Need to find a junk yard to cut one off from

Baer383 · 12-05-2012, 04:11 PM

Quote:

Originally Posted by z w/ backseat

Looks like a full wire assembly
33502-SZA-A02 (2009 - 2012)
(2) 7443 sockets
(1) 194 socket
are included on that assembly

Need to find a junk yard to cut one off from

Good research

z w/ backseat · 12-10-2012, 10:25 AM

Went to the junk yard over the weekend
The 2009 Pilot did not have the same socket as pictured or noted the number of earlier.

I did find a Toyota Matrix, maybe a 2006 that had a match. It is the same as a few other cars for Toyota. 81555-02210
The upper socket is for a 7443 bulb with 3 wires and the odd triangular shape to it. I will see if it fits once I get the rear light I ordered this morning.

Baer383 · 12-10-2012, 10:35 AM

Quote:

Originally Posted by z w/ backseat

Went to the junk yard over the weekend
The 2009 Pilot did not have the same socket as pictured or noted the number of earlier.

I was guessing at the year it maybe newer than a 2010 but a Honda pilot has them.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Have a problem brake light and traction light comes on	martin82	Brakes & Suspension	11	11-22-2016 09:40 PM
wiring rear fog light as brake light	Parrotguy	Nissan 370Z Roadster (Convertible)	12	09-03-2015 10:34 AM
Anyone installed the rear fog light as a brake light on a roadster?	Lee123	DIY Section (Do-It-Yourself)	4	05-01-2010 07:53 PM
Rear center-low brake light	getawaydriver	Exterior & Interior	1	02-16-2010 08:12 AM
The little plastic square on rear bumper above fog/brake light.....	LattimerII	Exterior & Interior	3	09-23-2009 06:48 PM

12-05-2012, 03:45 PM	#3 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 18	Thanks, I'll do some digging to see what diagrams I can find with a part number

12-05-2012, 04:00 PM	#4 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 18	Looks like a full wire assembly 33502-SZA-A02 (2009 - 2012) (2) 7443 sockets (1) 194 socket are included on that assembly Need to find a junk yard to cut one off from

12-10-2012, 10:25 AM	#6 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 18	Went to the junk yard over the weekend The 2009 Pilot did not have the same socket as pictured or noted the number of earlier. I did find a Toyota Matrix, maybe a 2006 that had a match. It is the same as a few other cars for Toyota. 81555-02210 The upper socket is for a 7443 bulb with 3 wires and the odd triangular shape to it. I will see if it fits once I get the rear light I ordered this morning.