Rear Foglight - Running light AND brake light

z w/ backseat · 12-05-2012, 03:35 PM

Quote:

Originally Posted by Baer383

All you need to do is use a brake light/tail light socket from a Honda Pilot.
It still has the same shape as the OE one no grinding

What year? I am assuming 2008 or later. All I can find is an overall harness with 3 sockets. 2 of the 3 sockets on that harness seem they would work. I am starting my projects this winter and would like to do this when I put in the light.

Baer383 · 12-05-2012, 03:41 PM

Quote:

Originally Posted by z w/ backseat

What year? I am assuming 2008 or later. All I can find is an overall harness with 3 sockets. 2 of the 3 sockets on that harness seem they would work. I am starting my projects this winter and would like to do this when I put in the light.

I'm not sure of the year but it is a newer SUV ,newer than 08.

z w/ backseat · 12-05-2012, 03:45 PM

Thanks, I'll do some digging to see what diagrams I can find with a part number

z w/ backseat · 12-05-2012, 04:00 PM

Looks like a full wire assembly
33502-SZA-A02 (2009 - 2012)
(2) 7443 sockets
(1) 194 socket
are included on that assembly

Need to find a junk yard to cut one off from

Baer383 · 12-05-2012, 04:11 PM

Quote:

Originally Posted by z w/ backseat

Looks like a full wire assembly
33502-SZA-A02 (2009 - 2012)
(2) 7443 sockets
(1) 194 socket
are included on that assembly

Need to find a junk yard to cut one off from

Good research

z w/ backseat · 12-10-2012, 10:25 AM

Went to the junk yard over the weekend
The 2009 Pilot did not have the same socket as pictured or noted the number of earlier.

I did find a Toyota Matrix, maybe a 2006 that had a match. It is the same as a few other cars for Toyota. 81555-02210
The upper socket is for a 7443 bulb with 3 wires and the odd triangular shape to it. I will see if it fits once I get the rear light I ordered this morning.

Baer383 · 12-10-2012, 10:35 AM

Quote:

Originally Posted by z w/ backseat

Went to the junk yard over the weekend
The 2009 Pilot did not have the same socket as pictured or noted the number of earlier.

I was guessing at the year it maybe newer than a 2010 but a Honda pilot has them.

yoayo · 12-11-2012, 01:45 AM

i was able to easily reproduce the socket.
Thanks a lot.
I will work on the electrical part tomorrow

GalletGun · 06-14-2014, 10:34 AM

I just did this mod recently. Keep in mind that the wire colors displayed on the illustration for the tail light harness are correct, so follow those colors. On your 7443 socket though, dont go by the wire colors, go by the A, B, and C labeling on the harness to discern which is the low filament, high filament, and ground wire.

I made the mistake of relying just on the wire colors and had my low and high filament wires reversed the first time. lol.

KaienZ34 · 06-14-2014, 03:40 PM

Quote:

Originally Posted by GalletGun

I just did this mod recently. Keep in mind that the wire colors displayed on the illustration for the tail light harness are correct, so follow those colors. On your 7443 socket though, dont go by the wire colors, go by the A, B, and C labeling on the harness to discern which is the low filament, high filament, and ground wire.

I made the mistake of relying just on the wire colors and had my low and high filament wires reversed the first time. lol.

Were you able to use the honda plug, like mentioned above?

Optimiser · 07-22-2014, 07:18 AM

I'm glad I live in AU, we get FL as standard.

6MT-Z34 · 08-12-2014, 06:37 PM

What kind of bulb did u guys buy? I'm looking to do this mod and found this bulb: http://www.superbrightleds.com/morei...ower-bulb/634/
What u guys think?

Edit: has anybody used this module?http://www.kahtec.com/smart_stop.htm

08-12-2014, 06:37 PM	#27 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 15	What kind of bulb did u guys buy? I'm looking to do this mod and found this bulb: http://www.superbrightleds.com/morei...ower-bulb/634/ What u guys think? Edit: has anybody used this module?http://www.kahtec.com/smart_stop.htm Last edited by 6MT-Z34; 08-12-2014 at 06:41 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Have a problem brake light and traction light comes on	martin82	Brakes & Suspension	11	11-22-2016 09:40 PM
wiring rear fog light as brake light	Parrotguy	Nissan 370Z Roadster (Convertible)	12	09-03-2015 10:34 AM
Anyone installed the rear fog light as a brake light on a roadster?	Lee123	DIY Section (Do-It-Yourself)	4	05-01-2010 07:53 PM
Rear center-low brake light	getawaydriver	Exterior & Interior	1	02-16-2010 08:12 AM
The little plastic square on rear bumper above fog/brake light.....	LattimerII	Exterior & Interior	3	09-23-2009 06:48 PM

12-05-2012, 03:45 PM	#18 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 15	Thanks, I'll do some digging to see what diagrams I can find with a part number

12-05-2012, 04:00 PM	#19 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 15	Looks like a full wire assembly 33502-SZA-A02 (2009 - 2012) (2) 7443 sockets (1) 194 socket are included on that assembly Need to find a junk yard to cut one off from

12-10-2012, 10:25 AM	#21 (permalink)
z w/ backseat Base Member Join Date: May 2009 Location: IL Posts: 11 Drives: 2010 White & Wine Rep Power: 15	Went to the junk yard over the weekend The 2009 Pilot did not have the same socket as pictured or noted the number of earlier. I did find a Toyota Matrix, maybe a 2006 that had a match. It is the same as a few other cars for Toyota. 81555-02210 The upper socket is for a 7443 bulb with 3 wires and the odd triangular shape to it. I will see if it fits once I get the rear light I ordered this morning.

12-11-2012, 01:45 AM	#23 (permalink)
yoayo Base Member Join Date: Jan 2011 Location: san diego Posts: 19 Drives: 370z Rep Power: 14	i was able to easily reproduce the socket. Thanks a lot. I will work on the electrical part tomorrow

06-14-2014, 10:34 AM	#24 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 11	I just did this mod recently. Keep in mind that the wire colors displayed on the illustration for the tail light harness are correct, so follow those colors. On your 7443 socket though, dont go by the wire colors, go by the A, B, and C labeling on the harness to discern which is the low filament, high filament, and ground wire. I made the mistake of relying just on the wire colors and had my low and high filament wires reversed the first time. lol.

07-22-2014, 07:18 AM	#26 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 453 Drives: 2012 Nissan 370Z MT Rep Power: 20144	I'm glad I live in AU, we get FL as standard.