Covering The Ugly Airbag Warning Viser Placards???

scottIN

I see a business venture here...

Bonzo

Well, I should definitely have material left over, but I'm not looking at trying to make money here. Perhaps I could CAD cut some for people who are interested on a first ask basis, until I run out of material that is. Say $5 for S&H. But we'll see. I have to get mine done first and see how it looks.

For others I think they could just buy some small pcs of 3M CF Di-noc off the internet (I quickly found 12 x 12 for like $10 and 12 x 24 for like $17 on Amazon), use some paper test cuts to come up with the exact size they want, lay that size out on the back of the CF with a ruler, then cut it using sharp scissors or even a razor blade with a straight edge. It won't need to be "perfect perfect" and still look good. At least it will look 95% better than the sticker there now.

I'm thinking that, since our warning sticker is heat pressed, and has an "indent" lip, that going about 3/16" to 1/4" larger all around (3/8" to 1/2" total size) with the CF will have the best long term results. This way the adhesive on the CF has room to grab the fabric material itself. Once it's on I doubt anyone will notice it's larger than before. The warning sticker is currently about 3-5/8" x 5", so a CF label of around 4" x 5-3/8" or 4-1/8" x 5-1/2" would probably be best. We'll see.

__________________
Finally Able To Order 2012 Model 8/24/2011
Delivered Tuesday November 15, 9:57 am!!!
2012, Auto, White, Sport, Kick Plates