CarbonSignal Amuse Rear installed

2ndChance · 03-18-2011, 09:15 PM

I want to buy this rear bumper but i live in Panama and I know there is a chance the bumper will deform during shipping. And I don't plan spending extra money on making it fit...

Was it a lot of work to make it fit nicely? what was needed to work on?

SeeyaBud86 · 03-18-2011, 10:51 PM

Quote:

Originally Posted by 2ndChance

I want to buy this rear bumper but i live in Panama and I know there is a chance the bumper will deform during shipping. And I don't plan spending extra money on making it fit...

Was it a lot of work to make it fit nicely? what was needed to work on?

The actual fitment is great, but the bumper does require a lot of work if you want it to look like mine. The quality is there, but your installer will need to make some custom brackets. My installer is top-notch and usually works on Ferrari's, Porsches, Lambo's, Aston Martin's, etc. He just went over the top on quality. You can tell because the paint is near identical and that is very hard to do with the pear white. My installer also did another clear coat on the carbon fiber.

In the actual bumper itself, there is a part where the license plate frame is that was a huge hole. My installer created a mold from my OEM bumper out of fiberglass to fit in that area so it would be as close to OEM as possible. Not only does it look great with the plate off, the plate is tightly secured and doesn't vibrate.

He also made a custom bracket for the trunk opener which actually sits more flush than it did on the OEM bumper. I will try and get some pics of that for you guys tomorrow.

SeeyaBud86 · 03-18-2011, 10:55 PM

Quote:

Originally Posted by theflyest1

Looks great bro! PW ftw

Do you have any issues w/ the F.I. tips touching the bumper? Mine is a tight fit w/ the amuse...probably have to get it adjusted at some point.

I went w/ a different paint scheme too...left the entire center section CF (license area and bra strap) - looks like a big diffuser, haha. I'll have to get some pics up soon.

I'm going w/ the Mine's add-on as well...may paint it PW though, not sure.

Keep it going...looks fantastic!

^^Forgot to answer your question about the F.I. exhaust. I have no fitment issue with the exhaust. The tips are very close to the openings but absolutely no problems. I can take a couple of pics up close if you'd like. I do not think my installer had to move the tips, but I know he did loosen them so he could clean the area around the mufflers so maybe he re-adjusted them to fit flush. It looks great though. I did some heavy pulls today and I did not hear any vibrating or clanging so I'm good to go.

docaam · 03-18-2011, 11:42 PM

Quote:

Originally Posted by SeeyaBud86

The actual fitment is great, but the bumper does require a lot of work if you want it to look like mine. The quality is there, but your installer will need to make some custom brackets. My installer is top-notch and usually works on Ferrari's, Porsches, Lambo's, Aston Martin's, etc. He just went over the top on quality. You can tell because the paint is near identical and that is very hard to do with the pear white. My installer also did another clear coat on the carbon fiber.

In the actual bumper itself, there is a part where the license plate frame is that was a huge hole. My installer created a mold from my OEM bumper out of fiberglass to fit in that area so it would be as close to OEM as possible. Not only does it look great with the plate off, the plate is tightly secured and doesn't vibrate.

He also made a custom bracket for the trunk opener which actually sits more flush than it did on the OEM bumper. I will try and get some pics of that for you guys tomorrow.

I got something like this done for number plate, then it was molded.

would love to see what you did for trunk opener

NewYorkJon34 · 03-19-2011, 12:02 AM

I wonder how much/what kind of work is needed for the actual Amuse rear?

Fly1 Motorsports · 03-19-2011, 01:46 AM

Quote:

Originally Posted by SeeyaBud86

^^Forgot to answer your question about the F.I. exhaust. I have no fitment issue with the exhaust. The tips are very close to the openings but absolutely no problems. I can take a couple of pics up close if you'd like. I do not think my installer had to move the tips, but I know he did loosen them so he could clean the area around the mufflers so maybe he re-adjusted them to fit flush. It looks great though. I did some heavy pulls today and I did not hear any vibrating or clanging so I'm good to go.

Thx! Yeah, I can fit a piece of paper btwn the exhaust and bumper, no rattle, but worried bout heat being so close. Dont wanna melt the bumper! Luckily I'm near Tony's shop so will swing by for an adjustment. Glad urs fits better

fairladyZ34 · 03-19-2011, 02:03 AM

Looks great!

CrownR426 · 03-19-2011, 02:28 AM

Tits!

definitionxmk · 03-19-2011, 02:40 AM

damn that rocks!!!

SeeyaBud86 · 03-19-2011, 08:12 AM

Quote:

Originally Posted by theflyest1

Thx! Yeah, I can fit a piece of paper btwn the exhaust and bumper, no rattle, but worried bout heat being so close. Dont wanna melt the bumper! Luckily I'm near Tony's shop so will swing by for an adjustment. Glad urs fits better

Quote:

Originally Posted by fairladyZ34

Looks great!

Quote:

Originally Posted by CrownR426

Tits!

Quote:

Originally Posted by definitionxmk

damn that rocks!!!

Thanks for the compliments guys.

SeeyaBud86 · 03-19-2011, 08:16 AM

Quote:

Originally Posted by docaam

I got something like this done for number plate, then it was molded.

would love to see what you did for trunk opener

It was something like that. I will try and get some pictures of the trunk opener and plate area today.

Red__Zed · 03-19-2011, 09:20 AM

looks absolutely amazing!

SeeyaBud86 · 03-19-2011, 09:47 AM

Quote:

Originally Posted by Red__Zed

looks absolutely amazing!

Thanks man. It took about two weeks and lots of work but it was worth it. It did come out pretty good.

SeeyaBud86 · 03-19-2011, 10:02 AM

Here are some pictures of the trunk opener. It sits very flush and is a lot easier to get to on this bumper.

Here is a couple of pictures showing the fitment with the exhaust.

And here is a picture of the top of the bumper which you see when you open the hatch. My installer did an excellent job keeping it close to OEM looking and clean.

Iconic · 03-19-2011, 04:49 PM

Looks great!

Are the side skirts and front bumper still stock? I can't tell

03-19-2011, 02:03 AM	#22 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 18	Looks great! __________________ From Z to G to BMW and back to a G! Nismo for life

03-19-2011, 02:28 AM	#23 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	Tits! __________________ Love + Hardwork + Passion RIP SVTRacer

03-19-2011, 02:40 AM	#24 (permalink)
definitionxmk Track Member Join Date: Jul 2009 Location: Los Angeles CA Posts: 973 Drives: Stage 2 SC 370Z Rep Power: 16	damn that rocks!!! __________________ *FALKEN . AMUSE . STANCE . INVIDIA . MINES . TOMMY KAIRA . BRIDE . VOLK RACING . GTM* Featured in DSPORT issue #137 - Follow me on Instagram: @definitionxmk

03-19-2011, 10:02 AM	#29 (permalink)
SeeyaBud86 Enthusiast Member Join Date: Jun 2009 Location: Naples, FL Posts: 480 Drives: 09 PW 370z 6MT Rep Power: 15	Here are some pictures of the trunk opener. It sits very flush and is a lot easier to get to on this bumper. Here is a couple of pictures showing the fitment with the exhaust. And here is a picture of the top of the bumper which you see when you open the hatch. My installer did an excellent job keeping it close to OEM looking and clean. __________________ My Z:http://www.the370z.com/members-370z-...l-finally.html 1969 MGB for sale: http://www.the370z.com/other-vehicle...ml#post1238143

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CarbonSignal Kickoff One-Time Offer REPLICA Amuse CF Group-Buy	CarbonSignal	Body Interior/Exterior	519	04-06-2014 12:39 PM
Rear Amuse Fascia!!!	crazybeasty	Nissan 370Z Pricing / Ordering Discussions	0	07-24-2010 09:53 PM
Mines and Amuse installed	Ztoon	Exterior & Interior	71	06-24-2010 02:56 AM
Powerhouse Amuse RS Silent Exhaust with Amuse Cats & Amuse Front Pipe	abgyak	Intake/Exhaust	3	04-14-2010 04:43 AM

03-18-2011, 09:15 PM	#16 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	I want to buy this rear bumper but i live in Panama and I know there is a chance the bumper will deform during shipping. And I don't plan spending extra money on making it fit... Was it a lot of work to make it fit nicely? what was needed to work on?

03-19-2011, 12:02 AM	#20 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	I wonder how much/what kind of work is needed for the actual Amuse rear?

03-19-2011, 09:20 AM	#27 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	looks absolutely amazing!

03-19-2011, 04:49 PM	#30 (permalink)
Iconic Base Member Join Date: Nov 2010 Location: Los Angeles, CA Posts: 10 Drives: Something Rep Power: 14	Looks great! Are the side skirts and front bumper still stock? I can't tell