Window Tint peeling issue

haydencowelle · 02-24-2012, 02:30 AM

If you have no idea on how to fix tint feeling better to bring it to tint shop. But in case, you think that's its pretty easy better to read this ==> How to Fix Window Tint Peeling | eHow.com

silviakid02 · 03-26-2012, 02:12 PM

Was just setting up my car to bring for tints in the morning. I removed the door cards to give them more room to work with and found a trick to help with the install. On the lower door jam is a rubber compression sensor that tells the car if the door is open or closed. If you back out the philips head screw about a half a turn it must break the ground and disable the switch because the window juts up as if the door is closed which will allow them to get deeper below the glass seal on the door to make sure it doesn't peel up. DO NOT forget to tighten the screw so the window drops before you close the door or the glass will smash into the window arch.

silviakid02 · 03-26-2012, 02:14 PM

Sorry just saw that ALT_370 addressed this issue a couple post up. I'm a dumb ***

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Tint	rudi	Australia/New Zealand	31	06-11-2018 06:05 PM
Window Issue. Anyone else?	In2Deep	Exterior & Interior	19	04-06-2018 11:53 AM
Clear Bra and 35% Window Tint on Platinum Graphite	VCuomo	Exterior & Interior	19	02-05-2011 03:51 PM
Window Tint Toronto, legal limit in Canada?	CAN-ZED	Exterior & Interior	3	09-29-2009 07:15 PM
Variable Window Tint \| Changes on the spot	nogoodname	Nissan 370Z General Discussions	33	09-15-2009 03:09 PM

02-24-2012, 02:30 AM	#1 (permalink)
haydencowelle Base Member Join Date: Jan 2012 Location: Australia Posts: 3 Drives: Nissan 350Z CS M6 Rep Power: 13	If you have no idea on how to fix tint feeling better to bring it to tint shop. But in case, you think that's its pretty easy better to read this ==> How to Fix Window Tint Peeling \| eHow.com

03-26-2012, 02:12 PM	#2 (permalink)
silviakid02 Base Member Join Date: Sep 2011 Location: Connecticut Posts: 79 Drives: 09 MB touring/sport Rep Power: 13	Was just setting up my car to bring for tints in the morning. I removed the door cards to give them more room to work with and found a trick to help with the install. On the lower door jam is a rubber compression sensor that tells the car if the door is open or closed. If you back out the philips head screw about a half a turn it must break the ground and disable the switch because the window juts up as if the door is closed which will allow them to get deeper below the glass seal on the door to make sure it doesn't peel up. DO NOT forget to tighten the screw so the window drops before you close the door or the glass will smash into the window arch.

03-26-2012, 02:14 PM	#3 (permalink)
silviakid02 Base Member Join Date: Sep 2011 Location: Connecticut Posts: 79 Drives: 09 MB touring/sport Rep Power: 13	Sorry just saw that ALT_370 addressed this issue a couple post up. I'm a dumb ***