Coolerworx Shifter Assembly (Dealers)

trangalang · 12-22-2020, 04:31 PM

Quote:

Originally Posted by redondoaveb

Look at post #137. Also, Coolerworx contacted me this morning and they will be redesigning the insert and let me know when they're available.

Yep, I saw that photo. I just didn't think that greasing the insert would have such a heavy impact since it's such a tight fit. Wasn't sure if it was just the whole insert being greased, or just the portion of the pin that inserts into the shaft. Can't remember if my pin had an o-ring or not but that could've been it.

Glad to hear that they'll be re-designing the insert but I'm not sure when v.3 would be available in the market. Definitely keep us updated!

DivideByZero · 12-24-2020, 11:17 PM

So I ended up ordering my shifter a couple of days ago. Here's to hoping I get sent a revised version with the fixed part.

BettyZ · 12-25-2020, 12:11 AM

Quote:

Originally Posted by redondoaveb

Look at post #137. Also, Coolerworx contacted me this morning and they will be redesigning the insert and let me know when they're available.

By "available" i assume they mean "we'll ship this out to you for free" ?

This damn thing was not cheap and I'd sooner sell it to JAR than pay for a fix they should have thought up in the first place.

Also, mad reps for running point on this.

370Tyler · 12-31-2020, 11:01 AM

Is it finally fixed!?! Can I buy one now and not fear I blew 600 bucks on a rattling pos!? Yay!

BettyZ · 01-01-2021, 12:05 AM

Took the Z out for a spin after a good grease job, had no rattling. Dodnt go past 3500 rpm tho as it's icy af out, I'm running summer tires, and the clutch is precisely 1.1 miles old.

Sent from my SM-G955U using Tapatalk

redondoaveb · 01-01-2021, 12:46 AM

Quote:

Originally Posted by BettyZ

Took the Z out for a spin after a good grease job, had no rattling. Dodnt go past 3500 rpm tho as it's icy af out, I'm running summer tires, and the clutch is precisely 1.1 miles old.

Sent from my SM-G955U using Tapatalk

I'll let Jar know when coolerworx contacts me about the new inserts. I'll ship one directly to him so he'll have it when you send him your shifter.

BettyZ · 01-01-2021, 01:29 AM

Fight me

NorthStyle · 01-01-2021, 08:37 AM

I was under the car doing the diff bushings/cover/brace so figured I'd do this as well. I ended up using a spare o-ring I had leftover after swapping my injectors (took a bit of persuasion but hey....) and a bunch of grease, but the rattling 'seems' to have disappeared. So we'll see...

Heads up though: for anyone expecting Coolerworx to replace this free of charge, good luck... I'll leave it at that.

370Tyler · 01-05-2021, 01:07 PM

Quote:

Originally Posted by NorthStyle

I was under the car doing the diff bushings/cover/brace so figured I'd do this as well. I ended up using a spare o-ring I had leftover after swapping my injectors (took a bit of persuasion but hey....) and a bunch of grease, but the rattling 'seems' to have disappeared. So we'll see...

Heads up though: for anyone expecting Coolerworx to replace this free of charge, good luck... I'll leave it at that.

Yea lol. Coolerworx website is garbage and same with customer service 90% of the time. I'd say if you don't order a whole new shifter you'll have to get an O-ring yourself and fix it lol, which is probably the easiest way anyways.

370Tyler · 01-07-2021, 12:45 PM

Just ordered mine through SOHO. Hopefully when I get it I don’t hate it!

370Tyler · 03-30-2021, 11:46 AM

not fixed lol.
but I got the o ring with mine and its all lubed up. it seems like the reverse lockout collar is vibrating in 3rd and 4th and sometimes 2nd. anyone have this?

NorthStyle · 03-30-2021, 02:07 PM

After installing the o-ring and greasing the insert, I haven't had any noises. Before, it would rattle in 3rd, never noticed in 2nd or 4th.

Mr.K · 12-05-2021, 03:32 PM

Any updates on whether revised inserts were put into production for the Coolerworx shifters or any reviews if it solved the issue?

redondoaveb · 12-05-2021, 04:23 PM

Quote:

Originally Posted by Mr.K

Any updates on whether revised inserts were put into production for the Coolerworx shifters or any reviews if it solved the issue?

Nope. Here's the correspondence I had with Coolerworx. I don't think they give a crap about fixing the issue.

Mr.K · 12-05-2021, 04:47 PM

Quote:

Originally Posted by redondoaveb

Nope. Here's the correspondence I had with Coolerworx. I don't think they give a crap about fixing the issue.

Thanks for sharing that man, sucks that they didn't bother to fix it basically a whole year later

. Any recommendations for the type of grease that would work to remedy this issue?

12-24-2020, 11:17 PM	#182 (permalink)
DivideByZero Base Member Join Date: Oct 2012 Location: Los Angeles Posts: 2 Drives: 20 Nissan 370Z Sport Rep Power: 12	So I ended up ordering my shifter a couple of days ago. Here's to hoping I get sent a revised version with the fixed part. redondoaveb likes this.

12-31-2020, 11:01 AM	#184 (permalink)
370Tyler Base Member Join Date: Apr 2019 Location: Winnipeg MB Age: 22 Posts: 66 Drives: 17 370Z DBP M6 Rep Power: 38947	Is it finally fixed!?! Can I buy one now and not fear I blew 600 bucks on a rattling pos!? Yay! BettyZ likes this. __________________ Follow My Instagram @tyler_hennebury

01-01-2021, 12:05 AM	#185 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Took the Z out for a spin after a good grease job, had no rattling. Dodnt go past 3500 rpm tho as it's icy af out, I'm running summer tires, and the clutch is precisely 1.1 miles old. Sent from my SM-G955U using Tapatalk Rusty, Hotrodz, old guy and 1 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

01-01-2021, 01:29 AM	#187 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Fight me old guy and redondoaveb like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

01-01-2021, 08:37 AM	#188 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	I was under the car doing the diff bushings/cover/brace so figured I'd do this as well. I ended up using a spare o-ring I had leftover after swapping my injectors (took a bit of persuasion but hey....) and a bunch of grease, but the rattling 'seems' to have disappeared. So we'll see... Heads up though: for anyone expecting Coolerworx to replace this free of charge, good luck... I'll leave it at that. JARblue, Rusty, Hotrodz and 4 others like this.

01-07-2021, 12:45 PM	#190 (permalink)
370Tyler Base Member Join Date: Apr 2019 Location: Winnipeg MB Age: 22 Posts: 66 Drives: 17 370Z DBP M6 Rep Power: 38947	Just ordered mine through SOHO. Hopefully when I get it I don’t hate it! __________________ Follow My Instagram @tyler_hennebury

03-30-2021, 11:46 AM	#191 (permalink)
370Tyler Base Member Join Date: Apr 2019 Location: Winnipeg MB Age: 22 Posts: 66 Drives: 17 370Z DBP M6 Rep Power: 38947	not fixed lol. but I got the o ring with mine and its all lubed up. it seems like the reverse lockout collar is vibrating in 3rd and 4th and sometimes 2nd. anyone have this? __________________ Follow My Instagram @tyler_hennebury

03-30-2021, 02:07 PM	#192 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	After installing the o-ring and greasing the insert, I haven't had any noises. Before, it would rattle in 3rd, never noticed in 2nd or 4th.

12-05-2021, 03:32 PM	#193 (permalink)
Mr.K Base Member Join Date: Mar 2021 Location: California Posts: 79 Drives: 2017 370z Nismo Rep Power: 4	Any updates on whether revised inserts were put into production for the Coolerworx shifters or any reviews if it solved the issue?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM