STILLEN 370Z Urethane Fascia - Sneak Peek - In Development

Kyle@STILLEN · 03-01-2010, 07:12 PM

Oh yea, the grills are already in the works for both the sides and the center section. We are also working on a smaller windshield washer bottle reservoir for the people who don't want to just paint their O.E. bottle black.

speedoflife · 02-28-2010, 02:56 PM

Quote:

Originally Posted by RCZ

Hope Stillen doesnt mind, its just for the sake of seeing it in one color.

That looks good.

370Zsteve · 03-09-2010, 05:20 PM

Quote:

Originally Posted by RCZ

Hope Stillen doesnt mind, its just for the sake of seeing it in one color.

I like it this way

LateralG'z · 03-18-2010, 08:15 PM

I like it a lot nice post

Quote:

Originally Posted by 370Zsteve

I like it this way

RCZ · 02-28-2010, 03:39 PM

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

G Fo12ce · 02-28-2010, 03:45 PM

Quote:

Originally Posted by RCZ

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

I say go painted. It works on the NISMO and if you change your mind I'm sure you could go vinyl or easily paint that section later.

Mike · 02-28-2010, 05:29 PM

Quote:

Originally Posted by RCZ

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

I guess I'm lucky mine is black, it will look about the same either way. I may go unpainted in the center though, if its black urethane, just to keep the chips down.

LiquidZ · 02-28-2010, 09:32 PM

Quote:

Originally Posted by RCZ

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

Or you could be like me and have the whole thing painted black

Looks great Stillen!

Supergoji · 02-28-2010, 08:15 PM

No imagination was put into this.

Shift · 03-01-2010, 05:53 PM

This is kinda an off question, will Stillen be releasing any details so that a pattern can be cut for clear bra placement. Spent a boat load getting the Z's clear bra put on. Would hate to get this front end on and painted. With no way to protect it.
Thinking I'm waaaaaaaaaaaaaaay ahead of myself.

Kyle@STILLEN · 03-01-2010, 05:57 PM

Quote:

Originally Posted by Shift

This is kinda an off question, will Stillen be releasing any details so that a pattern can be cut for clear bra placement. Spent a boat load getting the Z's clear bra put on. Would hate to get this front end on and painted. With no way to protect it.
Thinking I'm waaaaaaaaaaaaaaay ahead of myself.

It's interesting that you mention that. For a long time Josh and I have been trying to work with a clear bra manufacturer to see about offering clear bra as an available product for our urethane. Unfortunately we don't have a 3D scan or anything like that which we could email or release to suppliers but we're hoping to work with a company like 3M to give them a fascia and they could simply sell it to their installer's.

So basically at this time, no, we don't have an easy clear bra solution but we are working on getting that setup.

ZForce · 03-25-2010, 09:58 PM

That price is well within my price range. I have recapped some Q & A’s to keep them up front for future development.
Great job Stillen!

Quote:

Originally Posted by Caravanshaka

oh, and any idea how this will fit with Injen intakes that have he filters down below the headlights? It's either going to be a tight fit, or it's going to be perfect for a ram-air addition.

Quote:

Originally Posted by Kyle@STILLEN

I don't know that answer yet. We have found a smaller windshield washer bottle which I believe will be located in the same area as the injen filter but I'm not 100% sure about that. We wanted to relocate that windshield washer bottle so that it was out of the way of the openings and you didn't see some giant ugly white bottle with blue liquid in that vent.

This would def make up my mind to pull the trigger, if the facia will house the Injen CAI system. Not to mention, increasing your client base.

Quote:

Originally Posted by Shift

This is kinda an off question, will Stillen be releasing any details so that a pattern can be cut for clear bra placement. Spent a boat load getting the Z's clear bra put on. Would hate to get this front end on and painted. With no way to protect it.
Thinking I'm waaaaaaaaaaaaaaay ahead of myself.

Quote:

Originally Posted by Kyle@STILLEN

It's interesting that you mention that. For a long time Josh and I have been trying to work with a clear bra manufacturer to see about offering clear bra as an available product for our urethane. Unfortunately we don't have a 3D scan or anything like that which we could email or release to suppliers but we're hoping to work with a company like 3M to give them a fascia and they could simply sell it to their installer's.

So basically at this time, no, we don't have an easy clear bra solution but we are working on getting that setup.

Count me in for a bra, my vote would be for Venture Shield film.

Kyle@STILLEN · 03-26-2010, 01:25 PM

Well, I am very excited right now! I have just come back from our modeling shop and this fascia looks fantastic!!! There were just a couple of little areas that we weren't 100% happy with so we wanted to spend some time massaging the mold and making sure that everything is perfect. Everything looks great! Fit and finish is very nice and the mold is flowing nicely.

So, for those of you who have pre-ordered your fascia's they will be shipping in the next day or two. I'm having the guys take a look at the grills right now and they should be done with them soon. I think we have enough time to shoot and clean a couple parts today but I dont like rushing the cleaning process.

Thanks for your patience and I am confident that it will pay off!!!

Josh@STILLEN · 03-01-2010, 05:57 PM

No that's a valid question.. we'd be open to any of the majors coming down for measurements so it would hit the big databases.

We'll have to look into that.. we've talked about doing it for a lot of our urethane pieces. And whoever got the measurements would have some locked in business from guys doing the upgrade, so they wouldn't have to get a custom bra.

Kyle@STILLEN · 03-01-2010, 05:59 PM

Quote:

Originally Posted by Josh@STILLEN

No that's a valid question.. we'd be open to any of the majors coming down for measurements so it would hit the big databases.

We'll have to look into that.. we've talked about doing it for a lot of our urethane pieces. And whoever got the measurements would have some locked in business from guys doing the upgrade, so they wouldn't have to get a custom bra.

I won! LOL...Looks like Josh and I need to calm down with the replies a little LOL.

02-28-2010, 08:15 PM	#9 (permalink)
Supergoji Enthusiast Member Join Date: Dec 2008 Location: Westchester NY Age: 36 Posts: 311 Drives: Z32tt / Supra tt Rep Power: 257	No imagination was put into this. Last edited by admin; 03-01-2010 at 09:34 AM. Reason: .

03-01-2010, 05:53 PM	#10 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 59 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	This is kinda an off question, will Stillen be releasing any details so that a pattern can be cut for clear bra placement. Spent a boat load getting the Z's clear bra put on. Would hate to get this front end on and painted. With no way to protect it. Thinking I'm waaaaaaaaaaaaaaay ahead of myself. __________________ 2009 Mt Blue 7AT * GTSpec 4 point brace * Berk HFC * Stillen GEN III * Berk CBE * Forgestar F-14 * NISMO S Tuned Spoiler

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
front fascia cost?	Snakes709	Nissan 370Z General Discussions	7	09-22-2009 07:15 AM
Sneak Peek, Carbon Fiber B-Pillars @ The 370ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	3	08-25-2009 05:21 PM
Sneak Peek, Carbon Fiber Door Sills @ The 370ZSOURCE!!!!!	Michael@TheZStore	Exterior & Interior	2	07-29-2009 03:58 PM
Going to sneak a peek at a 2010 Genesis Coupe in a few minutes!!!	iamtherhino	Other Vehicles	5	03-07-2009 10:08 AM

03-01-2010, 07:12 PM	#1 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	Oh yea, the grills are already in the works for both the sides and the center section. We are also working on a smaller windshield washer bottle reservoir for the people who don't want to just paint their O.E. bottle black.

02-28-2010, 03:39 PM	#5 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

03-26-2010, 01:25 PM	#13 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	Well, I am very excited right now! I have just come back from our modeling shop and this fascia looks fantastic!!! There were just a couple of little areas that we weren't 100% happy with so we wanted to spend some time massaging the mold and making sure that everything is perfect. Everything looks great! Fit and finish is very nice and the mold is flowing nicely. So, for those of you who have pre-ordered your fascia's they will be shipping in the next day or two. I'm having the guys take a look at the grills right now and they should be done with them soon. I think we have enough time to shoot and clean a couple parts today but I dont like rushing the cleaning process. Thanks for your patience and I am confident that it will pay off!!!

03-01-2010, 05:57 PM	#14 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	No that's a valid question.. we'd be open to any of the majors coming down for measurements so it would hit the big databases. We'll have to look into that.. we've talked about doing it for a lot of our urethane pieces. And whoever got the measurements would have some locked in business from guys doing the upgrade, so they wouldn't have to get a custom bra.