Harness Bar Installed. :)

Rusty

Ok, I see how it's mounted now.

Here's my thread on installing the Robispec bar. It replaces the cheezy cross bar.

Robispec Harness Bar Install

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

asd370z

I've gotten into 2 wrecks, 1 front end and 1 back end. Both times I was using Schroth 4 point harnesses and never had an issue. The stock brace bar held just fine even with 2 180 lb people

Sent from my SM-N950U using Tapatalk

NorthStyle

How fast were you and/or the offending cars going in these wrecks?

Either way, I'd say you're more lucky than anything.

asd370z

First wreck was sliding into a guardrail going about 30 mph or so. 15k worth of damage. Due to them being harnesses, we had a slight jolt. If we were using stock seatbelts we definitely would have had whiplash.

2nd wreck was last monday. Guy rearended me going about 35/40. 8k worth of damage, sore neck the next day but thats it.

No damage to the brace bar either times.

That aluminum bar is just a shell that goes around an inner thick bar if I am not mistaken. Never any bending at all.

If I could even find a better bar to replace it I would. But both the Amuse and Robispec bars were almost impossible to find, and close to 1k if I recall correctly. Seems a bit crazy to me. And I feel safer with the stock bar than those thin "harness bars" that attach with L brackets


Sent from my SM-N950U using Tapatalk

gomer_110

Wrong! The aluminum bar you see is it. There is no inner bar. Additionally, unlike the Robispec bar which bolts directly to the chassis, the OE bar is held in place by flimsy sheet metal brackets.

And the reason harness bars regardless of design cost so much; legal LIABILITY. All it takes is one lawsuit, regardless of how baseless it is, to destroy a company.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

Rusty

The factory cross bar weights 1.5 lbs with brackets. It's .114" or 2.89mm thick. You can see how thick the brackets are.

Attached Images

	003.JPG (257.5 KB, 65 views)
	IMG_1012.JPG (106.7 KB, 59 views)
	IMG_1013.JPG (114.0 KB, 65 views)
	IMG_1014.JPG (116.8 KB, 54 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

asd370z

Aluminum is strong enough right? , JK but seeing this now semi worries me. Car is still in the shop so I have about a week to find a replacement. Since we are already in the thread, any suggestions for a cheap strong bar, and also a more expensive better quality bar? I need something I can buy today, not contact 10 different people and try to get custom made

Sent from my SM-N950U using Tapatalk

Chuck33079

Honestly, unless you're going all out with a full cage, appropriate seats, 6 point harnesses and a HANS, you're better off with the OEM restraints and airbags. Nissan has a lot more on the line than Bob's Discount Harness Bars & Chicken, so they over engineer everything and crash test the hell out of it. Also, "cheap" should not be a concern when dealing with brakes, safety systems, whisky or condoms.

Belts on the street, harnesses on the track.

You got lucky twice. Most people don't get a third try at it.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

asd370z

I have both proper seats and proper belts. No reason for 6 point because the 4 points I have are anti-sub. I understand that roll cage is usually needed in case of the roof collapsing but this is a street car not a track car. I'm noy rolling this thing or even remotely close. I just like how the harnesses keep you in the seat. Cipher bar looks good enough.

Sent from my SM-N950U using Tapatalk

Rusty

Yeah, aluminum is strong enough IF it's designed for the application. In this case. It's not. MA Motorsports makes a good harness bar. I've seen their bar at ZDayZ this year. Talk to Daelen. He's a good guy. Tell him Russ sent you.

With this set-up. You keep the stock cross bar. And you have better angles with the belts.

MA Motorsports | MA Motorsports 370Z Harness bar

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

asd370z

Thank you for the help. That looks like a pretty decent bar and will hold up well. Also won't get in the way of the seats.

Sent from my SM-N950U using Tapatalk

Rusty

You're welcome.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

2011 Nismo#91

https://www.youtube.com/watch?v=g40YatgE_CE
Not a really bad crash either.

https://www.youtube.com/watch?v=Qj95GuL3HH8
You can FF to the 2:12 Mark.

I know the car has an airbag but it's not made to deploy correctly with a harness.
Keep a harness for show/track, keep the the seat belts for the street.

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

Rusty

Did you watch the video after the 1st one.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

RyanWest

Rusty,

This harness bar does not attach to anything in these pictures.

The bar comes with a drop bolt that goes through the metal plating. Essentially getting two contact points for security.

It does not attach to the cross bar!

I think we get it, you like the MA bar. I do too..... Just not enough to spend $650 on it.