Automatic shift knob

KaienZ34 · 06-26-2011, 01:53 PM

Quote:

Originally Posted by 3SeventyZ

the most common knob ive seen on auto 350z's is this one from momo:

MOMO Automatic Shifter Knob, Automatic Gear Shift Knob

im just not sure if it will fit the auto 370z's

Yes they do check out this thread.

DIY: AT Shift knob removal/replacement

Imtired · 06-26-2011, 02:56 PM

It would be great if the metal collar on the momo knob was flush with the bottom of the shift gate, but I have no idea how far the button mechanism extends into the shaft of the shifter.

Someone much braver than I should hack one up.

fairladyZ34 · 02-28-2010, 08:52 AM

i would just like if the auto shift knob is shorter like the ones on newer BMWS

SophiaZ · 02-28-2010, 10:24 AM

Made for a Mazda but I wonder how the fitment would be. This looks pretty sharp

Amazon.com: Black Leather Gear Shift Knob with Rotary Emblem for Automatic Transmission Mazda RX-8: Automotive

flashburn · 02-28-2010, 11:48 AM

Except for the fact that the top of it says "RX-8".

SophiaZ · 02-28-2010, 03:43 PM

I already stated it was Mazda's but to get rid of the RX-8 can't be hard...little spray paint or tint overlay would do fine I'm sure

y0willy0 · 05-11-2010, 08:29 PM

will that momo knob work on a 370 since its button is on the front side?

chippy · 11-07-2010, 01:56 PM

Quote:

Originally Posted by y0willy0

will that momo knob work on a 370 since its button is on the front side?

Yes, Imtired on here has one fitted already. Apparently the mechnics of the 370z button are actually on the top of the shaft, so the Momo works.

Here's a link to the thread, as I was interested to see how the standard knob comes off.

AT Knob Removal - Help.

marcussoori · 11-07-2010, 12:51 PM

Let me know if you find a knob that works.

I agree with the previous poster who said he wants the shifter post to be shorter...anyone know how this can be done? It would be cool if the height could be the same as on the GT-R.

On that note, anyone think the GT-R knob would work? Also, perhaps the GT-R shifter post is interchangeable with ours?

Just a thought...

ncheung85 · 11-07-2010, 11:18 PM

I think this look good. It's the momo shift knob with a boot.

Don't mean to change the topic of this thread, but has anyone changed their hand brake.

docaam · 11-08-2010, 12:27 AM

simota changed his brake handle though he has a manual

dudesky · 06-25-2011, 11:03 PM

hey guys I have a question. If our 370z's shift button presses down to work, can't we just put any MoMo's shift knob that has no button because then that button will be always pressed and we will be just changing P to D without pressing the button. ??? can this work???

Imtired · 06-26-2011, 07:18 AM

If the button is pushed down all the time you will get a warning on the gas gauge cluster. It will want you to put it into park to start the car even though it's already in park. This happened to me when I put my knob on a bit to low on the shaft.
I don't remember exactly but I don't think I was able to start the car without loosening and raising the knob.

happytheman · 06-26-2011, 08:23 PM

Dunno, but there's a possibility that the GTR knob will work.

Csquared · 06-26-2011, 08:35 PM

I do want to know if the GTR one works. It looks nice.

02-28-2010, 08:52 AM	#3 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 21	i would just like if the auto shift knob is shorter like the ones on newer BMWS __________________ From Z to G to BMW and back to a G! Nismo for life

11-07-2010, 12:51 PM	#9 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 18	Let me know if you find a knob that works. I agree with the previous poster who said he wants the shifter post to be shorter...anyone know how this can be done? It would be cool if the height could be the same as on the GT-R. On that note, anyone think the GT-R knob would work? Also, perhaps the GT-R shifter post is interchangeable with ours? Just a thought... __________________ Stillen CBE & G3 LTIs, Motordyne M370, Berk HFCs, H&R 15/20mm spacers, CiNcity headlights, yellow OEM strut brace, Password: JDM CF engine bay parts, EVO-R CF front bumper parts, CF "Z" badge, VIS CF hood, Fujimura CF "diffuser", Show-N-Go plate frame, Katzkin red interior, interior CF, Pioneer BT-90 full system, Viper SmartStart

11-08-2010, 12:27 AM	#11 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 30	simota changed his brake handle though he has a manual __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

06-26-2011, 08:23 PM	#14 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1824	Dunno, but there's a possibility that the GTR knob will work. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-26-2011, 02:56 PM	#2 (permalink)
Imtired Base Member Join Date: Jan 2010 Location: MA Posts: 123 Drives: '16 R, '86+'87 GN Rep Power: 17	It would be great if the metal collar on the momo knob was flush with the bottom of the shift gate, but I have no idea how far the button mechanism extends into the shaft of the shifter. Someone much braver than I should hack one up.

02-28-2010, 10:24 AM	#4 (permalink)
SophiaZ A True Z Fanatic Join Date: Dec 2009 Location: South Jersey Posts: 1,466 Drives: 2020 50th anniv 7AT Rep Power: 6734	Made for a Mazda but I wonder how the fitment would be. This looks pretty sharp Amazon.com: Black Leather Gear Shift Knob with Rotary Emblem for Automatic Transmission Mazda RX-8: Automotive

02-28-2010, 11:48 AM	#5 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 21	Except for the fact that the top of it says "RX-8".

02-28-2010, 03:43 PM	#6 (permalink)
SophiaZ A True Z Fanatic Join Date: Dec 2009 Location: South Jersey Posts: 1,466 Drives: 2020 50th anniv 7AT Rep Power: 6734	I already stated it was Mazda's but to get rid of the RX-8 can't be hard...little spray paint or tint overlay would do fine I'm sure

05-11-2010, 08:29 PM	#7 (permalink)
y0willy0 Base Member Join Date: May 2010 Location: Cherokee, NC Posts: 11 Drives: 09 370Z S 7AT Yellow Rep Power: 17	will that momo knob work on a 370 since its button is on the front side?

06-25-2011, 11:03 PM	#12 (permalink)
dudesky Track Member Join Date: Apr 2011 Location: Kraid's lair Posts: 516 Drives: E46 M3 6MT Rep Power: 17	hey guys I have a question. If our 370z's shift button presses down to work, can't we just put any MoMo's shift knob that has no button because then that button will be always pressed and we will be just changing P to D without pressing the button. ??? can this work???

06-26-2011, 07:18 AM	#13 (permalink)
Imtired Base Member Join Date: Jan 2010 Location: MA Posts: 123 Drives: '16 R, '86+'87 GN Rep Power: 17	If the button is pushed down all the time you will get a warning on the gas gauge cluster. It will want you to put it into park to start the car even though it's already in park. This happened to me when I put my knob on a bit to low on the shaft. I don't remember exactly but I don't think I was able to start the car without loosening and raising the knob.

06-26-2011, 08:35 PM	#15 (permalink)
Csquared Enthusiast Member Join Date: Mar 2010 Location: Hong Kong Posts: 302 Drives: 09 Nissan 370z Y 7sp Rep Power: 17	I do want to know if the GTR one works. It looks nice.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB OEM Shift Knob	bcarrollg35	Wanted	21	07-07-2009 02:48 AM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 06:41 PM
Shift knob HELp!	DJcuetip	Southern California Region	0	06-16-2009 06:58 AM
wtb oem 370z shift knob	bcarrollg35	Nissan 370Z General Discussions	8	05-09-2009 01:27 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM