AT Knob Removal - Help.

chippy · 10-29-2010, 03:28 AM

Does anyone know how to remove the AT selector shift knob? I fancy one of those RSW carbon covers for the bottom gate panel but would imagine that the knob needs removing to fit it?

I downloaded a PDF workshop manual for the 370z but can't seem to find anywhere that details how to remove the selector knob.

Thanks

kenchan · 10-29-2010, 11:24 AM

you can hacksaw it off.

(i dont know mines a MT).

check with triple's.

tonybui · 10-29-2010, 02:18 PM

I'm so outdated, didn't know 40th comes with AT

Jeffblue · 10-29-2010, 02:26 PM

i think it does in Canada as an option, but isn't the OP from New jersey in the US?

chippy · 10-30-2010, 09:54 AM

No Jersey, channel Islands - UK

docaam · 11-01-2010, 10:50 AM

would love to see how it is done lol

Imtired · 11-01-2010, 02:30 PM

I changed mine months ago but if I remember correctly-
Pull down the lower gray part of the knob, It will disconnect, then pull out the U shaped pin that it covers. Done.

XwChriswX · 11-01-2010, 02:46 PM

Kinda believe you need the button in the knob to shift correct.. So pretty much, aren't we stuck with the one we get from the factory?

Imtired · 11-01-2010, 02:55 PM

I switched mine with this one (not from here but the same exact one). It works fine.

chippy · 11-01-2010, 03:37 PM

Thanks alot. Is it the very bottom bit of the knob - the metallic bit?

I fancy one of these (although the knob looks interesting too!!) which seems to need the knob removed.

Imtired · 11-01-2010, 03:39 PM

Yeah the silver part slides down, you have to wiggle and force it a bit.

chippy · 11-01-2010, 03:54 PM

Great thanks!!!!!

cc370z · 11-01-2010, 08:58 PM

i had this shifter on my AT 350z the shifter knob moved up and down in place of the button on knob. It looked cool but it was held on by a set screw that would work lose every couple of months.

KaienZ34 · 11-01-2010, 10:31 PM

Quote:

Originally Posted by Imtired

I switched mine with this one (not from here but the same exact one). It works fine.

This looks very cool, how did the install go not bad. So you just push the button on the top and put it in gear ?

flashburn · 11-02-2010, 07:23 AM

Quote:

Originally Posted by Imtired

I switched mine with this one (not from here but the same exact one). It works fine.

I'm also interested in more information. Do you have any installed pics?

10-29-2010, 03:28 AM	#1 (permalink)
chippy Base Member Join Date: Sep 2010 Location: Jersey Posts: 52 Drives: 370z 40th AT Quartz Rep Power: 14	AT Knob Removal - Help. Does anyone know how to remove the AT selector shift knob? I fancy one of those RSW carbon covers for the bottom gate panel but would imagine that the knob needs removing to fit it? I downloaded a PDF workshop manual for the 370z but can't seem to find anywhere that details how to remove the selector knob. Thanks

11-01-2010, 10:50 AM	#6 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	would love to see how it is done lol __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

11-01-2010, 02:46 PM	#8 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Kinda believe you need the button in the knob to shift correct.. So pretty much, aren't we stuck with the one we get from the factory? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Emblem Removal	tonmed123	Nissan 370Z General Discussions	7	01-10-2012 09:29 PM
taillight removal	DAGRACING	DIY Section (Do-It-Yourself)	2	07-08-2010 04:33 PM
help with gum removal	thispecialk	Nissan 370Z General Discussions	7	08-05-2009 10:41 AM
shock removal	racerxj17	Brakes & Suspension	10	06-11-2009 06:25 PM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM

10-29-2010, 11:24 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	you can hacksaw it off. (i dont know mines a MT). check with triple's.

10-29-2010, 02:18 PM	#3 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 426	I'm so outdated, didn't know 40th comes with AT

10-29-2010, 02:26 PM	#4 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	i think it does in Canada as an option, but isn't the OP from New jersey in the US?

10-30-2010, 09:54 AM	#5 (permalink)
chippy Base Member Join Date: Sep 2010 Location: Jersey Posts: 52 Drives: 370z 40th AT Quartz Rep Power: 14	No Jersey, channel Islands - UK

11-01-2010, 02:30 PM	#7 (permalink)
Imtired Base Member Join Date: Jan 2010 Location: MA Posts: 123 Drives: '16 R, '86+'87 GN Rep Power: 15	I changed mine months ago but if I remember correctly- Pull down the lower gray part of the knob, It will disconnect, then pull out the U shaped pin that it covers. Done.

11-01-2010, 02:55 PM	#9 (permalink)
Imtired Base Member Join Date: Jan 2010 Location: MA Posts: 123 Drives: '16 R, '86+'87 GN Rep Power: 15	I switched mine with this one (not from here but the same exact one). It works fine.

11-01-2010, 03:37 PM	#10 (permalink)
chippy Base Member Join Date: Sep 2010 Location: Jersey Posts: 52 Drives: 370z 40th AT Quartz Rep Power: 14	Thanks alot. Is it the very bottom bit of the knob - the metallic bit? I fancy one of these (although the knob looks interesting too!!) which seems to need the knob removed.

11-01-2010, 03:39 PM	#11 (permalink)
Imtired Base Member Join Date: Jan 2010 Location: MA Posts: 123 Drives: '16 R, '86+'87 GN Rep Power: 15	Yeah the silver part slides down, you have to wiggle and force it a bit.

11-01-2010, 03:54 PM	#12 (permalink)
chippy Base Member Join Date: Sep 2010 Location: Jersey Posts: 52 Drives: 370z 40th AT Quartz Rep Power: 14	Great thanks!!!!!