NEW Fringe XVO "Afterburner" Exhaust Tips

b1adesofcha0s · 08-25-2011, 09:54 PM

Quote:

Originally Posted by XwChriswX

Now are these meant to go on 'any' exhaust after removing their tips? Or is this going on an exhaust to be built coming soon? I'm not sure people are going to be excited to cut off their tips... Unless they get the types of exhausts that have removable tips to begin with??

That's what I was wondering. I think it will require cutting tips though.

Econ · 08-25-2011, 10:22 PM

yes, these will require cutting of your stock tips.

FromG2Z · 08-25-2011, 11:32 PM

Quote:

Originally Posted by errett

If they are going on Econ's Z, don't you need to paint the inside yellow? At least for a while, then change it to purple.

E

Lol....we love u econ....

Quote:

Originally Posted by Econ

yes, these will require cutting of your stock tips.

hmmmm here's my opinion. I think those would be wayyyy too overboard for a mostly stock z with stock tips. Imo, to successfully pull that look off, u will need a lot of supporting visual mods. Else, the tips alone will come off as cheesy and trying too hard to get attention for the wrong reasons.

RCZ · 08-25-2011, 11:35 PM

they look like the Carrera GT's

ncheung85 · 08-25-2011, 11:36 PM

Quote:

Originally Posted by FromG2Z

hmmmm here's my opinion. I think those would be wayyyy too overboard for a mostly stock z with stock tips. Imo, to successfully pull that look off, u will need a lot of supporting visual mode. Else, the tips alone will come off as cheesy and trying too hard to get attention for the wrong reasons.

In for pic

XwChriswX · 08-25-2011, 11:36 PM

Quote:

Originally Posted by FromG2Z

hmmmm here's my opinion. I think those would be wayyyy too overboard for a mostly stock z with stock tips. Imo, to successfully pull that look off, u will need a lot of supporting visual mode. Else, the tips alone will come off as cheesy and trying too hard to get attention for the wrong reasons.

Before:

After:

( Click to show/hide )

FringeXVO · 08-25-2011, 11:44 PM

These are designed to fit aftermarket 2.5" exhausts like the ARK system that Econ is currently using. I haven't seen an aftermarket OR stock exhaust system for the Zs that utilizes a removable tip design. Unfortunately this leaves any customers to have to have a shop remove and install the new tips. If there is enough demand (I don't need much) I will make a version that can fit onto other size piping, like whatever size the stock exhaust uses, for example. As I understand, one of the first upgrades people make to the Zs is to change the exhaust. I decided that if someone is willing to change their exhaust, they are going to be much more wiling to install different tips than someone who buys a car and puts up the fuzzy dice and calls it good....so I built these to fit the aftermarket crowd's needs. I plan on talking to the exhaust companies about possibly getting tips from me for their systems, but it is way too soon for me to expect any of them to agree. I have to generate demand first.

XwChriswX · 08-25-2011, 11:46 PM

The Akrapovic exhaust uses 2 different removable tip options, CF or Brushed Ti.
They would be a good company to look into perhaps... They are big in the motorcycle exhaust world too which I think if you could make a smaller version, you might get a lot of interest from them as well as they love to make their bikes as fast as jets anyways.

FringeXVO · 08-25-2011, 11:51 PM

Quote:

Originally Posted by errett

If they are going on Econ's Z, don't you need to paint the inside yellow? At least for a while, then change it to purple.

E

Already done. Coater was miffed.

I just sent an inquiry to Akropovic, since none of their documentation shows the exit tube diameter. Their tips have a slightly larger outer diameter (125mm vs. 114.3mm), and if they use 2.5" tubing, then the Afterburner tips will slip fit and clamp right on, with cutting slits in the clamping tube being the only modification needed (I may just laser cut this mod in advance and make it an option when you purchase). I'll let you know as soon as they contact me.

The GTR version are already clamp-on, and of course I would prefer this for the other Z exhausts. For example:

The Z version that has a little extra tubing so it can be trimmed to stick in or out as much as you want it to, and is slip on and WELD, like the tips that have to be removed. For example:

Thanks Chris!

JZNx · 08-25-2011, 11:54 PM

pix on 370z?

Nitrouz · 08-26-2011, 12:10 AM

This was done 2 years ago in the GTR community by Boost Logic...

No offence and just want to clarify...do you work for Boost Logic? Or is this a replica of those exhaust tips?

Boost Logic GTR 4" Exhaust System :: Exhaust :: Nissan R35 GTR :: Boost Logic

FringeXVO · 08-26-2011, 01:19 AM

Quote:

Originally Posted by Nitrouz

This was done 2 years ago in the GTR community by Boost Logic...

No offence and just want to clarify...do you work for Boost Logic? Or is this a replica of those exhaust tips?

Boost Logic GTR 4" Exhaust System :: Exhaust :: Nissan R35 GTR :: Boost Logic

None taken.

It was a year ago last March actually, cause I was pulling a late night trying to get them to sit on the black GTR just right...in time for the Supra Meet. I designed the GTR version and once Zohair saw it on the car he wanted it on the kit. I used to hand make them for Boost Logic, but they were made by hand and not near the quality you are seeing here.

Waiz · 08-26-2011, 01:43 AM

In for

installed

RoshDawg · 08-26-2011, 02:23 AM

This has seriously grown on me. Down for pics. Too bad it won't fit without cutting the stock tips

FromG2Z · 08-26-2011, 05:55 AM

Quote:

Originally Posted by child9

These are designed to fit aftermarket 2.5" exhausts like the ARK system that Econ is currently using. I haven't seen an aftermarket OR stock exhaust system for the Zs that utilizes a removable tip design. Unfortunately this leaves any customers to have to have a shop remove and install the new tips. If there is enough demand (I don't need much) I will make a version that can fit onto other size piping, like whatever size the stock exhaust uses, for example. As I understand, one of the first upgrades people make to the Zs is to change the exhaust. I decided that if someone is willing to change their exhaust, they are going to be much more wiling to install different tips than someone who buys a car and puts up the fuzzy dice and calls it good....so I built these to fit the aftermarket crowd's needs. I plan on talking to the exhaust companies about possibly getting tips from me for their systems, but it is way too soon for me to expect any of them to agree. I have to generate demand first.

Chris,
I have invidia geminis, and they come with removable tips.

08-25-2011, 10:22 PM	#32 (permalink)
Econ A True Z Fanatic Join Date: Jan 2011 Location: New York City Posts: 2,546 Drives: Fiat? Rep Power: 19	yes, these will require cutting of your stock tips. __________________ 2014 Triumph Thruxton 900 2013 Fiat 500 Abarth 2009 Nissan 370z

08-25-2011, 11:44 PM	#37 (permalink)
FringeXVO Base Member Join Date: Aug 2011 Location: Austin Posts: 142 Drives: 2JZJeep Rep Power: 13	These are designed to fit aftermarket 2.5" exhausts like the ARK system that Econ is currently using. I haven't seen an aftermarket OR stock exhaust system for the Zs that utilizes a removable tip design. Unfortunately this leaves any customers to have to have a shop remove and install the new tips. If there is enough demand (I don't need much) I will make a version that can fit onto other size piping, like whatever size the stock exhaust uses, for example. As I understand, one of the first upgrades people make to the Zs is to change the exhaust. I decided that if someone is willing to change their exhaust, they are going to be much more wiling to install different tips than someone who buys a car and puts up the fuzzy dice and calls it good....so I built these to fit the aftermarket crowd's needs. I plan on talking to the exhaust companies about possibly getting tips from me for their systems, but it is way too soon for me to expect any of them to agree. I have to generate demand first. __________________ http://i54.photobucket.com/albums/g9...uitySigpic.jpg We exist to do great things. FringeXVO-Mech Design Fab

08-25-2011, 11:46 PM	#38 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	The Akrapovic exhaust uses 2 different removable tip options, CF or Brushed Ti. They would be a good company to look into perhaps... They are big in the motorcycle exhaust world too which I think if you could make a smaller version, you might get a lot of interest from them as well as they love to make their bikes as fast as jets anyways. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-26-2011, 12:10 AM	#41 (permalink)
Nitrouz Track Member Join Date: Nov 2010 Location: Vancouver, BC Posts: 934 Drives: 40th Z, GTR, 420z-tt Rep Power: 15	This was done 2 years ago in the GTR community by Boost Logic... No offence and just want to clarify...do you work for Boost Logic? Or is this a replica of those exhaust tips? Boost Logic GTR 4" Exhaust System :: Exhaust :: Nissan R35 GTR :: Boost Logic __________________ 2010 370Z 40th Anniversary - Anastasia VENACI / AERO JACKET / HKS USA / MXP / NISMO / FALKEN / STILLEN / T1R / MR WORKS / CARBON SIGNAL / EVO-R / BLUE BATMOBILE

08-26-2011, 02:23 AM	#44 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 14	This has seriously grown on me. Down for pics. Too bad it won't fit without cutting the stock tips __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

08-25-2011, 11:35 PM	#34 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	they look like the Carrera GT's

08-25-2011, 11:54 PM	#40 (permalink)
JZNx Base Member Join Date: Jul 2011 Location: **SoCal Posts: 246 Drives: 370z Rep Power: 13	pix on 370z?

08-26-2011, 01:43 AM	#43 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,257 Drives: Z33 & GE8 Rep Power: 459	In for installed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ONLY 11 370z GRIP TRUE DUAL EXHAUST "B" STOCK PRICING	TeamARK	ARK Performance Inc	12	10-11-2011 12:56 PM
ONLY 11 370z GRIP TRUE DUAL EXHAUST "B" STOCK PRICING	TeamARK	Exhaust/Intake	34	04-21-2011 10:11 PM
FS: Socal - Injen Cutom True Dual Exhaust W/ Custom Quad 4" Tips	tazma61	Parts for sale (Private Classifieds)	26	11-13-2010 07:24 PM
"X" or "Y" type exhaust which one better?	Elia Cid	Intake/Exhaust	7	08-20-2010 11:09 PM
"Dancing with the Dealer" with the 40th - hope to be in the "New Owner" section soon	optiontrader	New Forum Member	8	08-03-2010 11:37 PM

*NEW* Fringe XVO "Afterburner" Exhaust Tips

NEW Fringe XVO "Afterburner" Exhaust Tips