*NEW* Fringe XVO "Afterburner" Exhaust Tips

errett

If they are going on Econ's Z, don't you need to paint the inside yellow? At least for a while, then change it to purple.

E

XwChriswX

Now are these meant to go on 'any' exhaust after removing their tips? Or is this going on an exhaust to be built coming soon? I'm not sure people are going to be excited to cut off their tips... Unless they get the types of exhausts that have removable tips to begin with??

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

b1adesofcha0s

That's what I was wondering. I think it will require cutting tips though.

__________________
Project: b1adeZmobile (2009 370Z) | Uprev Tune by AAM Competition | Berk Exhaust
Project: b1adeZmobile 2.0 (2014 C7 Z51) | Corsa Xtreme Exhaust

FringeXVO

Already done. Coater was miffed.

I just sent an inquiry to Akropovic, since none of their documentation shows the exit tube diameter. Their tips have a slightly larger outer diameter (125mm vs. 114.3mm), and if they use 2.5" tubing, then the Afterburner tips will slip fit and clamp right on, with cutting slits in the clamping tube being the only modification needed (I may just laser cut this mod in advance and make it an option when you purchase). I'll let you know as soon as they contact me.

The GTR version are already clamp-on, and of course I would prefer this for the other Z exhausts. For example:


The Z version that has a little extra tubing so it can be trimmed to stick in or out as much as you want it to, and is slip on and WELD, like the tips that have to be removed. For example:



Thanks Chris!

__________________
http://i54.photobucket.com/albums/g9...uitySigpic.jpg We exist to do great things. FringeXVO-Mech Design Fab