In comparison to HR 350z Dynos

andre12031948 · 10-28-2013, 11:06 AM

Quote:

Originally Posted by Alstann

First night ever with my Z at the track, I clipped a mid 13 second run, bone stock. When I get home later, I'll post my time slips, I save all of them.

My buddy tranceformer has crazy good times under his belt. I would say a low 13 or even 13 flat is doable with a skilled driver with lots of seat time. Check out the drag times thread on the forum.

And the 350zs were both DE and HR. HR is a much closer match, but I still did alright. For reference, I dynoed 305whp with HFC/Exhaust.

I was there when Ray & Jason did their best times. That's where & how I noticed that the 370z had more power & potentials.

Still, beside those two, I so far have not seen a SINGLE 370 in my neck of the woods break 13 seconds. We have a ton of 370's in the N. East!!! You pick the reason why.

"I clipped a mid 13 second run, bone stock". That's excellent, but you still couldn't touch 12.9 to low 13's HR 350's w bolt ons. that I ran across on the track

You have more to work with than they did, so let's see some mid 12's from you, then brag how you "mopped up" all the 350z's.

FIRST time I took my 08 350z to the track was in Florida/same track. I did put on m/t street radials that were better than stock but still could not hold my car from spinning them. 2 months after getting the car, bone stock but for the tires, I did ALL my runs between 13.2 & 13.5. with my best being 13.195.

So, take it easy

Got to go now!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Dynos	Notsud 13	Intake/Exhaust	4	09-19-2012 04:54 PM
I need your dynos and tuning info!	Huck	Tuning	28	08-12-2012 01:05 PM
DFW Area Shop Recommendations for Dynos	vipor	Texas	15	01-21-2010 03:37 PM
STILLEN Exhaust & Gen 3 Intake Dynos - 18hp Each!	Josh@STILLEN	Intake/Exhaust	96	03-09-2009 03:33 PM