Forged Performance: Project 370Z Race Car Build!!

Nitex · 08-19-2010, 04:12 PM

Quote:

Originally Posted by ChrisSlicks

I have the Forgestar 18x10 up front, 18x11 rear, lowered with camber kit. Fitment was just fine, plenty of clearance to the lip with my 3.0 degrees of camber and I imagine fairly flush looking but still no rub if you backed it down to between 1.0 and 1.5. I had a slight clearance issue at full lock when I installed my BC ER coilovers, but this was the wheel hitting the external reservoir and I was able to rotate the placement of the reservoir slightly to prevent that.

Hrrmm so with some negitive camber and around 1inch drop or so, 19x10 upfront should have minimal rub with a 265 35 or so?

Edit* with a +30 something offset. Any issues with running the 19x9 F 19x11 R? I would think this could possibly create some unwanted understeer? Maybe i should create a thread in the wheel/tire section.. Sorry for the jack!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: 370Z Volk Wheel fitments are coming now!!!	Sharif@Forged	Wheels & Tires	121	06-19-2009 08:38 AM
Welcome Forged Performance	AK370Z	Forged Performance	29	04-23-2009 08:43 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 02:28 PM
Follow the build of our Nissan GT-R Race-car	Kyle@STILLEN	STILLEN	4	02-25-2009 11:20 AM