Transmission removal and CSC

Denny McLain

Need a little help from someone whom has "been there, done that."

Pulled the transmission and getting ready to put everything back together. I'm a bit confused regarding the Concentric Slave Cylinder. If you read the manual it says to never reuse the CSC. Does that mean every time you remove the transmission or every time you remove the CSC? The factory manual (for me anyway) is not clear. My assumption is being the actual CSC is not removed, you do not need to replace it. IF it were removed, (not just the transmission) you would replace it.

Can someone tell me if I'm right or wrong.

Denny

DIGItonium

CSC isn't that expensive compared to the labor of having to replace one down the road after doing clutch work. Also, you wouldn't want dust particles to get sucked into CSC lines which will cause it to fail sooner.

In this case, you're better off with a new OEM CSC or heavy duty one. I vote for heavy duty. The OEM one will fail sooner or later.

__________________

Denny McLain

I understand they are not a lot of money. Guess my question is it it necessary to replace one everytime the transmission is pulled?

Denny

lemon-fresh

How often are you planning on pulling the transmission?

Mitco39

Should you even replace the heavy duty ones when you take it apart? Or can you reuse those?

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Denny McLain

What does that matter? The question is do they need to be replaced everytime a transmission is pulled? No other question. Period!

Denny

Mitco39

The service manual says yes. And Lemon-Fresh was just getting at if you dont swap it out now the trans will be coming out sooner or later again. Hence the question.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Denny McLain

Also, being the CSC was never removed. Just the trans. The manual is not clear, it just says to replace it every time the CSC is removed..


REMOVAL AND INSTALLATION
CSC (CONCENTRIC SLAVE CYLINDER)
CAUTION:
• Never reuse CSC (Concentric Slave Cylinder) body and CSC tube. Because CSC slides back to the original position every time when removing transmission assembly.

Denny

Mitco39

I think its pretty clear? Maybe I am misreading it?

"Because CSC slides back to the original position every time when removing transmission assembly"

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Joe@ZSpeed

Yes, It must be replaced, At least with the stock unit. When the trans is installed the slave is compressed, when you remove the trans the slave extends all the way out collecting all the debris (abrasive clutch particles) into the seal of the slave.

We have had a few people reuse our HD version after pulling the trans without any issues although we recommend changing it if it has been in for a longer amount of time, We offer a new cylinder by itself (no lines, adapters ect) at a lower cost, or you can send the whole thing back and we can replace/rebuild it for you.

I just had one of our long time, one of the first users, of our HD slave kit contact us about our Wilwood master cylinder upgrade as his stock one is wearing out and this is what he had to say about the HD slave kit.

Quote..
" Not sure if you remembered me, was 1 of the 1st few to use your metal csc, i'm located in Singapore its a fantastic product, lasted me 2 rebuilts of my os giken twin plates total around 50k miles with heavy usuage in drifting"

Pretty sure he is still using it now.

__________________

Phone 937-506-7224
E-Mail Sales@Zspeed.com
www.ZSPEED.com

Mitco39

Good to know!

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

Denny McLain

That's the kind of answer I was lookin for. Thank you.

Denny

Joepro

I just finished my clutch the other day, used Joe's CSC, night and day when you see them side by side. Being these things are failure prone, I would replace it. These trannys are easy to take out, but its still a pain and at lease a good half day to a day down time, let alone if you need a tow.

__________________
Swift|Koni|SPC| FI CBE|Z1|Stillen|Sbend|Zspeed|R/T Tuned|523 whp|458 tq|10.5 psi|SOLD
Joepro's Journal|Joepro's Boosted Performance Build |Pittsburgh-Western-Pa-Ohio-Wv-Group

DIGItonium

Ooh I see what you mean. I had 2 HD CSCs. The first one was good, but I went ahead and replaced it because it endured lots of stress from disc failure (tons of soot build up in the bell housing). The second CSC went through a couple of transmission swaps in a month, and it is doing well. I'm definitely looking forward to the new master.

__________________

Denny McLain

Called a local dealer checking on availability of a CSC and in the DFW area (13,000,000 people) there was only one in stock in the whole area. This raised a red flag as this is a huge Metro area. Either the customer must wait 2-3 business days to receive the part, or they are not replaced each time. Let's just say, I'm suspicious they are.

After removal of the CSC (bought a replacement) it appears that yes, there is clutch disc contamination as mentioned by Joe at ZSpeed. However, after playing with it, they can be flushed out quite easily. The existing CSC is fairly new as it was replaced under warranty by the dealer. Knowing what I know now, I'd never purchase a new one. Just flushed out the old one and remove the source for potential failure. The contamination can be easily removed, and I'm keeping the part for future use.

Live n learn.



Denny