|
Has anyone had an issue when installing this pedal where the clutch does not engage? I just finished install of v3.3 and followed all the instructions (except the clevis end
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-29-2019, 08:18 PM
|
#36 (permalink) |
|
Base Member
Join Date: Jun 2012
Location: Miami
Age: 35
Posts: 224
Drives: 16-370Z Nismo-PW-MT
Rep Power: 14  |
Has anyone had an issue when installing this pedal where the clutch does not engage?
I just finished install of v3.3 and followed all the instructions (except the clevis end upgrade, i left the stock one on) and when i put the car into first gear and release the clutch it seemed to be engaging fine. I went out for a quick test drive, however it may not have been fully engaging, as it was slipping soon after, about 0.5 miles into my drive the clutch is not engaging at all, i put car in 1st gear and fully release clutch and car won't roll. I adjusted the upper brown switch to such a way that it would be pressed just slightly as the pedal was fully released. is there any adjustment for clutch engagement i should be looking at?
__________________
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| light clutch pedal? | boosted180 | Engine & Drivetrain | 21 | 06-07-2014 01:53 PM |
| My clutch pedal became useless for a little while... | Vbp6US | Engine & Drivetrain | 17 | 07-01-2012 05:48 PM |
| Clutch pedal gone bad | brakedrift12 | Nissan 370Z General Discussions | 5 | 07-04-2011 10:09 PM |
| clutch pedal issues? | xgrudgex | Engine & Drivetrain | 17 | 01-31-2011 08:44 PM |
| Knock from the clutch pedal | Oscar135 | Engine & Drivetrain | 34 | 07-27-2010 12:10 PM |
107Likes
Threaded Mode
