09-19-2022, 01:54 PM
|
#10 (permalink)
|
|
Base Member
Join Date: Nov 2021
Location: TX
Posts: 4
Drives: 17 Nissan 370z Sport
Rep Power: 3360
|
Quote:
Originally Posted by 370DriftZ
I finally dropped the transmission and the pressure plate was loose. Two bolts on pressure plate were gone and the rest were finger right. There's uneven wear on PP teeth. The smooth shaft on trans where throwout bearing slides, isn't smooth anymore. Noticed my throwout bearing and sleeve were not meshed together completely or evenly. I looked in z1 website just for the cover/plate but it doesn't seem to be sold separately.
I think im gonna have to swap the whole thing for a zspeed cmak. Too much trouble with this kit.
|
If you go with the ZSpeed CMAK I would reach out to them to see if the kit and your current Flywheel and Clutch are compatible. If you get the kit and the bearing is not the correct size (Thickness) you could have engagement issues due to the stack height of the Z1 Flywheel and Clutch. Though I might be speaking out of my butt.
|
|
|
Similar Threads
8Likes
Threaded Mode
