Gallery Gasket Time?

Rojoryu · 11-27-2021, 04:47 PM

Quote:

Originally Posted by Averying

If you have a set of digital calipers u might be able to measure the thread size/pitch yourself.

I got a pitch gauge and found my calipers, I was able to successfully clean the threads up. In case this ever happens to anyone else, the correct size tap is an M16 x 1.5.

Rojoryu · 11-29-2021, 05:19 PM

It’s alive! Around 100 on cold start, floating in the 20’s at about 160 degrees.

redondoaveb · 11-29-2021, 05:28 PM

Quote:

Originally Posted by Rojoryu

It’s alive! Around 100 on cold start, floating in the 20’s at about 160 degrees.

Great job!

Averying · 11-29-2021, 05:37 PM

Where is your sensor located and what oil are you using? Just curious

And how long did it take you to swap the gaskets?

Rojoryu · 11-29-2021, 05:45 PM

Quote:

Originally Posted by Averying

Where is your sensor located and what oil are you using? Just curious

And how long did it take you to swap the gaskets?

I tee’d from the factory sensor right before the oil filter. Using 0w-40. It took me a little over a week but in my defense 4 days was spent waiting for some additional parts.

Rusty · 11-29-2021, 06:00 PM

Good job.

I have a Sucker Punch oil pump and the ESP gaskets waiting on me for when I get the energy to do it.

11-29-2021, 05:37 PM	#34 (permalink)
Averying Enthusiast Member Join Date: May 2018 Location: Rhode Island Posts: 398 Drives: '09 370Z, '03 G35 Rep Power: 11063	Gallery Gasket Time? Where is your sensor located and what oil are you using? Just curious And how long did it take you to swap the gaskets? __________________ 2009 Sport Touring \| Platinum Graphite \| GTM Stage 1 Supercharger \| BC BR Coilovers \| Hotchkis Swaybar \| Z1 FUCAs \| AME TM-02 Wheels \| Z1 2-piece Front Rotors \| Z1 Clutch & Flywheel \| Invidia Gemini Catback \| GTM Resonated Test Pipes

11-29-2021, 06:00 PM	#36 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,852 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Good job. I have a Sucker Punch oil pump and the ESP gaskets waiting on me for when I get the energy to do it. JARblue, redondoaveb and Rojoryu like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gallery Gasket Questions	south	Engine & Drivetrain	8	10-23-2020 10:23 PM
Oil gallery gasket?	ClemsonVQdude	Engine & Drivetrain	14	09-04-2020 10:39 PM
Gallery Gasket Replacament.	south	Engine & Drivetrain	11	04-03-2020 11:36 AM
Rear Timing Cover Oil Gallery Gasket	jys8569	Engine & Drivetrain	6	02-17-2020 01:27 PM
Oil Gallery Gasket	Bill	Engine & Drivetrain	0	11-09-2017 12:23 AM