11-16-2020, 12:25 PM
|
#16 (permalink)
|
|
Base Member
Join Date: Jun 2019
Location: Canada
Posts: 92
Drives: 2010 370z 6MT
Rep Power: 7
|
Quote:
Originally Posted by Rusty
I had to cut the fins on mine for clearance with the FI exhaust. The Z1 cover increases the amount of lube by about 1/2 liter. I also have a diff cooler and a temp gauge installed. I've seen temps as high as 270F before turning on the pump and fan. With the cooler, there is 3 liters of lube in my set up.
I have all of the SPL catalog on my Z. Solid diff bushings, sub frame bushings, etc. The diff bushings really didn't make that much difference in noise.
|
Since I will not track the car and the abuse only consists of acceleration pulls from a roll, could I postpone the diff cooler if I do get the Z1 finned cover and the Nismo GT L.S.D Pro or the upgraded diff may get hot without an aftermarket diff cooler?
|
|
|
Similar Threads
34Likes
Threaded Mode
