Observed Oil Pressure with a gauge

Originally Posted by filip00

Raising this thread as I finally had a chance to observe oil pressure for a moment and I'm not sure if I'm worried for no reason or not.

So, I only just checked cold/warm idle and 3k rpm pressures and they were:

Cold startup oil pressure: 7.5bar ~ 108psi
Warm idle oil pressure: 1.6bar ~ 23psi
Warm at 3k rpm: >4bar ~ 58psi

This is with the 25row oil cooler with the thermostatic plate (so it wasn't open at the time of reading), and the pressure sensor is Tee'd of the factory mounting point.

I have replaces galley gaskets last year. This should all be good, right?