|
OK today I received a Z1 clutch flywheel and pressure plate, took the day ff work to install it and it still will not release. So at the direction of
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-13-2017, 06:25 PM
|
#15 (permalink) |
|
Track Member
Join Date: Nov 2010
Location: DFS
Posts: 900
Drives: ???
Rep Power: 55   |
OK today I received a Z1 clutch flywheel and pressure plate, took the day ff work to install it and it still will not release. So at the direction of experts I started the car and shifted in gear and applied the brakes. Motor ran slower but did slip. tried again and did not work and we had a smell. Checked and now when you depress the clutch it sprays fluid. Something is not tight. So I start to pull the trans again and it's stuck. All the bolts are out. Now the clutch will not release and the trans is stuck to the motor. Clutch fluid was black when I drained the slave cylinder. Anyone have a way to pull the trans? I am thinking a motorcycle tie down strap from the trans to the rear of the frame...
If I can't get it apart it will have to go to my local shop. HELP Please!
__________________
It's not my fault I'm old, I was born a very long time ago! |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stage 3 clutch install | kentmo280z | Engine & Drivetrain | 5 | 05-15-2015 08:39 AM |
| Trans clutch/fly install | YzGyz | Engine & Drivetrain | 11 | 01-14-2015 11:04 AM |
| Help with RJM Clutch Pedal Install | NoHyperbole | Southern California Region | 3 | 01-13-2015 09:50 AM |
| Clutch Install Advice | 40 to 332 | DIY Section (Do-It-Yourself) | 6 | 07-25-2014 11:26 PM |
| Clutch install | GaleForce | Canada | 8 | 10-27-2012 02:01 PM |
11Likes
Threaded Mode
