GT-R turbos on the VQ37

EliteXpress · 10-22-2017, 08:41 PM

Sent you a lil token of appreciation, hope you finalize this project and help put a lot more Boosted Z'$ on the streets!

husam2012 · 10-23-2017, 11:46 AM

Thank you everyone for your help! It's really appreciated and shows how good this community is.

I will be updating everyone as soon as I get any news

Thanks again!

natedog37 · 10-23-2017, 04:01 PM

Boom! $5 bucks as promised. Come on everyone, it's quick and easy to donate. Seriously, I hope you've enjoyed reading along as much as I have, if you have, donate so we can see it get completed and tested (flogged) properly.

husam2012 · 10-26-2017, 07:08 PM

Thank you! I really appreciate the help from you guys

Here’s a small update. Finally got a revised steering rack shim/spacer to make the oem braces fit without modification!

Sent from my iPhone using Tapatalk

husam2012 · 10-27-2017, 06:59 PM

Mounted it on the car. The steering shaft clears perfectly while only spacing the rack down 1/2 an inch! GTM's earlier kits spaced it out by a whole inch.

Also, here's some pictures of how the turbos look from the underside with the downpipes.

Don't mind the steering shaft scratches. That was before I added any spacers at all.

Budget doesn't afford me anything more than the Megan Y pipe and a open dump past the diff but it sounds perfect!

My nismo exhaust is for sale if anyone wants it!!

Sent from my iPhone using Tapatalk

natedog37 · 11-09-2017, 03:52 PM

Bummer, although it just proves you were right about your bearings. I see your https://www.gofundme.com/help-me-fin...gtr-conversion is up to a whopping $80 bucks! I think if this has any chance of growing legs you'll have to get your "kit" out there. Good luck man, you have talent and drive which is a rare combo.

DONATE to the cause people!

sirnixalot · 10-30-2017, 08:20 AM

I've been back and forth in my head trying to choose a route to boost. Gotta say I love the OEM look and feel of this, along with the fact that the air filters end up above the water line.

Any chance you could do a recap of what the end goal is for what the kits would come with?

Exhaust flange adapters
Steering rack spacers
Downpipes?

sirnixalot · 11-06-2017, 08:38 AM

Just donated

husam2012 · 11-06-2017, 12:09 PM

Thank you! My goal is to have both downpipes and inlets along with the oil/coolant lines and everything needed to bolt on the turbos.
If things don’t go as good as im hoping, then its just the adapter kit.

Sad news but i’m not really upset. Im just content that i got to achieve this but destroyed this engine in the process by overlooking the oil filter stud.

My father took it to work today as he wanted to try it out, and a piston decided to leave it’s home. Just as I predicted but he told me he was accelerating in 6th which probably helped a little in destroying it this fast

Sent from my iPhone using Tapatalk

Jayhovah · 11-06-2017, 12:33 PM

Quote:

Originally Posted by husam2012

Thank you! My goal is to have both downpipes and inlets along with the oil/coolant lines and everything needed to bolt on the turbos.
If things don’t go as good as im hoping, then its just the adapter kit.

Sad news but i’m not really upset. Im just content that i got to achieve this but destroyed this engine in the process by overlooking the oil filter stud.

My father took it to work today as he wanted to try it out, and a piston decided to leave it’s home. Just as I predicted but he told me he was accelerating in 6th which probably helped a little in destroying it this fast

( Click to show/hide )

RIP Original motor. We are pulling for you man!!!

Rusty · 11-06-2017, 06:07 PM

Boy......................this sucks!

JTM88 · 11-06-2017, 06:17 PM

Damn, that sucks

husam2012 · 11-09-2017, 10:02 AM

I'm currently really tight on money and I had a thought the other day.

I can sell my current turbo setup to buy an engine and help with finances and the making of more turbo kits to sell.

Would there be any interest if i were to part out the turbo kit? How much would you guys think it can go for?

Turbos are undamaged, but can be always sent for a quick rebuild for under $300.

I can include everything required to install the turbo kit including injectors, a new 340 pump, intercooler, intercooler piping, oil cooler (never hooked to the engine so it's not contaminated) all oil/coolant lines and downpipe that mounts to the stock exhaust/ y pipe/ any aftermarket exhaust.

Including inlets, turbos already clocked to work perfectly. Might be missing a few things but this will include everything i currently have minus my return fuel system and 1050CC injectors.

Let me know what you guys think!

Jayhovah · 11-09-2017, 10:23 AM

Quote:

Originally Posted by husam2012

I'm currently really tight on money and I had a thought the other day.

I can sell my current turbo setup to buy an engine and help with finances and the making of more turbo kits to sell.

Would there be any interest if i were to part out the turbo kit? How much would you guys think it can go for?

Turbos are undamaged, but can be always sent for a quick rebuild for under $300.

I can include everything required to install the turbo kit including injectors, a new 340 pump, intercooler, intercooler piping, oil cooler (never hooked to the engine so it's not contaminated) all oil/coolant lines and downpipe that mounts to the stock exhaust/ y pipe/ any aftermarket exhaust.

Including inlets, turbos already clocked to work perfectly. Might be missing a few things but this will include everything i currently have minus my return fuel system and 1050CC injectors.

Let me know what you guys think!

I'd think you could get at least 3k and as much as 4.5k. Might consider throwing in your GTR injectors (if they havent sold yet) to make it more of a complete kit if thats what the buyer wants... you'd have to find the right buyer though, since this is a 1-off setup at this point in the process. Could take some time to find a buyer.. make sure you post on the facebook Z/G Marketplace in addition to this forum. In the classifieds here you will have to compete with a GTM kit that is also available at the moment.

sirnixalot · 11-09-2017, 03:56 PM

Quote:

Originally Posted by husam2012

I'm currently really tight on money and I had a thought the other day.

I can sell my current turbo setup to buy an engine and help with finances and the making of more turbo kits to sell.

Would there be any interest if i were to part out the turbo kit? How much would you guys think it can go for?

Turbos are undamaged, but can be always sent for a quick rebuild for under $300.

I can include everything required to install the turbo kit including injectors, a new 340 pump, intercooler, intercooler piping, oil cooler (never hooked to the engine so it's not contaminated) all oil/coolant lines and downpipe that mounts to the stock exhaust/ y pipe/ any aftermarket exhaust.

Including inlets, turbos already clocked to work perfectly. Might be missing a few things but this will include everything i currently have minus my return fuel system and 1050CC injectors.

Let me know what you guys think!

pm'd.....

10-22-2017, 08:41 PM	#1 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	Sent you a lil token of appreciation, hope you finalize this project and help put a lot more Boosted Z'$ on the streets! __________________ Boosted Performance Kit Built By JMS Racing 700whp. IG: @EliteXpress370z

10-26-2017, 07:08 PM	#4 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Thank you! I really appreciate the help from you guys Here’s a small update. Finally got a revised steering rack shim/spacer to make the oem braces fit without modification! Sent from my iPhone using Tapatalk __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

10-27-2017, 06:59 PM	#5 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	GT-R turbos on the VQ37 Mounted it on the car. The steering shaft clears perfectly while only spacing the rack down 1/2 an inch! GTM's earlier kits spaced it out by a whole inch. Also, here's some pictures of how the turbos look from the underside with the downpipes. Don't mind the steering shaft scratches. That was before I added any spacers at all. Budget doesn't afford me anything more than the Megan Y pipe and a open dump past the diff but it sounds perfect! My nismo exhaust is for sale if anyone wants it!! Sent from my iPhone using Tapatalk __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning Last edited by husam2012; 10-27-2017 at 08:16 PM.

10-30-2017, 08:20 AM	#7 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	I've been back and forth in my head trying to choose a route to boost. Gotta say I love the OEM look and feel of this, along with the fact that the air filters end up above the water line. Any chance you could do a recap of what the end goal is for what the kits would come with? Exhaust flange adapters Steering rack spacers Downpipes? __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

11-06-2017, 08:38 AM	#8 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	Just donated __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

10-23-2017, 11:46 AM	#2 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Thank you everyone for your help! It's really appreciated and shows how good this community is. I will be updating everyone as soon as I get any news Thanks again!

10-23-2017, 04:01 PM	#3 (permalink)
natedog37 Base Member Join Date: Apr 2012 Location: PacNW Posts: 12 Drives: Workin' on it. Rep Power: 14	Boom! $5 bucks as promised. Come on everyone, it's quick and easy to donate. Seriously, I hope you've enjoyed reading along as much as I have, if you have, donate so we can see it get completed and tested (flogged) properly.

11-09-2017, 03:52 PM	#6 (permalink)
natedog37 Base Member Join Date: Apr 2012 Location: PacNW Posts: 12 Drives: Workin' on it. Rep Power: 14	Bummer, although it just proves you were right about your bearings. I see your https://www.gofundme.com/help-me-fin...gtr-conversion is up to a whopping $80 bucks! I think if this has any chance of growing legs you'll have to get your "kit" out there. Good luck man, you have talent and drive which is a rare combo. DONATE to the cause people!

11-06-2017, 12:09 PM	#9 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Thank you! My goal is to have both downpipes and inlets along with the oil/coolant lines and everything needed to bolt on the turbos. If things don’t go as good as im hoping, then its just the adapter kit. Sad news but i’m not really upset. Im just content that i got to achieve this but destroyed this engine in the process by overlooking the oil filter stud. My father took it to work today as he wanted to try it out, and a piston decided to leave it’s home. Just as I predicted but he told me he was accelerating in 6th which probably helped a little in destroying it this fast Sent from my iPhone using Tapatalk __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

11-06-2017, 06:07 PM	#11 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,447 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Boy......................this sucks! __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-06-2017, 06:17 PM	#12 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	Damn, that sucks __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

11-09-2017, 10:02 AM	#13 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	I'm currently really tight on money and I had a thought the other day. I can sell my current turbo setup to buy an engine and help with finances and the making of more turbo kits to sell. Would there be any interest if i were to part out the turbo kit? How much would you guys think it can go for? Turbos are undamaged, but can be always sent for a quick rebuild for under $300. I can include everything required to install the turbo kit including injectors, a new 340 pump, intercooler, intercooler piping, oil cooler (never hooked to the engine so it's not contaminated) all oil/coolant lines and downpipe that mounts to the stock exhaust/ y pipe/ any aftermarket exhaust. Including inlets, turbos already clocked to work perfectly. Might be missing a few things but this will include everything i currently have minus my return fuel system and 1050CC injectors. Let me know what you guys think!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	1	10-16-2016 09:03 PM
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	0	08-11-2015 03:30 PM
[FOR SALE] Someone please buy my turbos!	NIZZING	Parts for sale (Private Classifieds)	3	11-12-2014 08:47 PM
EFR Turbos	frydrce	Forced Induction	34	08-30-2012 09:43 AM
somebody who knows a lot about turbos please help	kevin1985912	Forced Induction	15	10-05-2010 11:00 AM