Which oil cooler is the best?

Rusty · 01-05-2018, 06:52 PM

Quote:

Originally Posted by Bshields22

Recommendation on gauge brands?

Hard to install?

Estimated labor costs?

Assuming N/A Engine with 34 row oil cooler....

Everyday Oil Pressure around town?

TrackDay pressure?

Canyon run Pressure?

This is the gauge I used. It has a LOW and HIGH Warning lights. In the Gauge Notes. Write in the you want the Gauge to say OIL PRESS. And order a 8ft wiring harness.
https://www.speedhut.com/gauge/GR-PR...si-(w--warning)

You also need to get an adapter to mount the sensor at the filter.
Oil Pressure Sensor Adapter, 1/8" BSPT - Engine - Autotech Motoring

Hard to install? Not really. Read my thread.

Labor cost? Zero. did it myself

Have a lot of info in my build thread. Starting on page 43.

glennsz · 10-29-2017, 06:28 PM

glennsz · 10-29-2017, 06:29 PM

glennsz · 10-29-2017, 06:30 PM

Bshields22 · 01-05-2018, 04:31 PM

Just installed the Fast Intentions 34 Row Oil Cooler. N/A Engine. Works great...absolutely recommend. For the longest time I would chime in and you might not need an oil cooler because I would track mine but never hit limp mode. I have done some work to the Z since then and have increased my lap times much more. Now that my times are better then engine works harder....limp mode activated!....Oil Cooler eliminated that.

01-05-2018, 04:31 PM	#5 (permalink)
Bshields22 Enthusiast Member Join Date: Nov 2012 Location: Anaheim, CA Posts: 422 Drives: 2012 Black 370Z-R Rep Power: 699	Just installed the Fast Intentions 34 Row Oil Cooler. N/A Engine. Works great...absolutely recommend. For the longest time I would chime in and you might not need an oil cooler because I would track mine but never hit limp mode. I have done some work to the Z since then and have increased my lap times much more. Now that my times are better then engine works harder....limp mode activated!....Oil Cooler eliminated that. Rusty likes this. __________________ 308 rwhp \| 252 rwtq \| Fast Intentions CBE 18" Res \| Stillen Gen 3 CAI \| EcuTek Tune \| Stoptech Slotted Rotors and Sport Pads \| KW V3 Coilovers \| SPL Upper Control Arms & Lower Rear Arms \| Seibon CF TS Hood \| Vossen CVT \| SPC Toe bolts

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
[FOR SALE] Oil cooler kit with 19 row cooler - brand new	Vbp6US	Parts for sale (Private Classifieds)	4	03-27-2014 03:08 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM
[FOR SALE] AT Transmission Cooler with Setrab 19 Row cooler	zakimak	Parts for sale (Private Classifieds)	4	03-03-2012 11:44 AM

10-29-2017, 06:28 PM	#2 (permalink)
glennsz Base Member Join Date: Jun 2012 Location: Addison, IL Posts: 7 Drives: 11 370Z Blk/Ch ST M6 Rep Power: 14

10-29-2017, 06:29 PM	#3 (permalink)
glennsz Base Member Join Date: Jun 2012 Location: Addison, IL Posts: 7 Drives: 11 370Z Blk/Ch ST M6 Rep Power: 14

10-29-2017, 06:30 PM	#4 (permalink)
glennsz Base Member Join Date: Jun 2012 Location: Addison, IL Posts: 7 Drives: 11 370Z Blk/Ch ST M6 Rep Power: 14