Billet Oil Pump Gears and Backing Plate - Group Buy Interest??

Carbon_z · 02-23-2016, 01:16 PM

Are the modified Vq3.7 pumps the only pumps compatible with this? GT-R compatible?

Total D · 02-23-2016, 02:01 PM

I haven't looked at a GT-R oil pump to be able to give you that answer. If I can get my hands on a pump, then I'd be able to further investigate. If not the same, and gears are an issue, then I guess I'd be looking at making those as well.

imjello · 02-23-2016, 03:11 PM

interested, especially since they will be pre-built. price is important

phunk · 02-23-2016, 04:38 PM

Quote:

Originally Posted by Carbon_z

Are the modified Vq3.7 pumps the only pumps compatible with this? GT-R compatible?

VR38 oil pump is no where near compatible with the VQ. Its a 2 stage pump that mounts inside the upper pan and driven by a chain off the timing sprocket.

Total D · 02-23-2016, 05:14 PM

Thanks Charles, for clariflying that for us.

ban25 · 02-24-2016, 11:22 AM

Quote:

Originally Posted by Rusty

You forgot to add a billet crank.

Added to the list!

ban25 · 02-24-2016, 11:25 AM

Quote:

Originally Posted by Total D

Hey guys,

Just wanted to let you guys know, after talking with Charles, I'll be taking over the torch to get these gears made. This will allow him to continue on other product development and since we already have the DE/Revup gears done, it makes sense.

The drawings should be done in a few weeks and then we can start getting them made. We are using a Nismo pump as our base pump, so we know what to improve and what to leave alone. We do the full pump service, so pump is modified to accommodate the billet gears and we will also attach our billet back plate.

If you're interested let me know and we can start a list. I'll go over more details once the drawings are finished.

Sign me up!

Total D · 02-24-2016, 02:49 PM

Quote:

Originally Posted by ban25

Sign me up!

Cool, I'll put you down. Thanks!

Quote:

Originally Posted by Carbon_z

What I was really asking, is if he was making a conversion kit or just gears for the 3.7 pumps.

I'm doing the gears and the backplate. We also modify the pumps to compliment the gears, so it's not just a gear set swap. Although, it could be done that way, we just want to make sure we can get more out of the pump besides just strengthend gears.

Rusty · 02-24-2016, 03:24 PM

When you get a price. And I think it justifiable. I could be in.

Total D · 02-24-2016, 03:57 PM

It will be priced below the Nismo and provide you a better pump that addresses the issues even the Nismo deals with.

Elmo370z · 02-24-2016, 06:42 PM

My only problem is there is no evidence backing this up, Will these gears hold up to constant abuse past 7.500 rpms?

Total D · 02-26-2016, 07:41 AM

On the DE/revup, a stock pump only held 3" of vaccum. This out of the box, never opened. After modifying the pump, just the pump, we were able to hold around 18-20" of vaccum. That's a 600% increase of stock. Along with the other mods we do, there was an increase of flow for about 8-10 %, all this helping with cavatation at higher rpms.

The gears, the only thing different is the material and another process we use to make the gears stronger. While I haven't tested the VHR yet, I don't see why we cant replicate what we did with the DE. I hate to put it like this, but you can buy a nismo, know that they fail, and be out of pocket $1400. If not, you can go with our pump, save money and at least get the same performance if not better, and have billet gears and a billet back plate. We are using a Nismo pump as our base, to make this an even closer comparison, not just a regular VHR pump.

andy_meng1024 · 02-26-2016, 08:36 AM

Can I use the billet gears and back plate if I already have the Nismo pump?

iPhone

gbrettin · 02-26-2016, 01:16 PM

What other items would be needed to spin higher RPM's other than these gears and tune?

gomer_110 · 02-26-2016, 01:26 PM

better crankshaft, valve spring upgrade

02-23-2016, 01:16 PM	#166 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	Are the modified Vq3.7 pumps the only pumps compatible with this? GT-R compatible? __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

02-24-2016, 03:24 PM	#174 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,900 Drives: 2011 Nismo GM 6M Rep Power: 2684436	When you get a price. And I think it justifiable. I could be in. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-24-2016, 06:42 PM	#176 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	My only problem is there is no evidence backing this up, Will these gears hold up to constant abuse past 7.500 rpms? imjello likes this.

02-26-2016, 07:41 AM	#177 (permalink)
Total D Base Member Join Date: Apr 2011 Location: USA Posts: 159 Drives: 03 Nissan 350z PPW M Rep Power: 6725	On the DE/revup, a stock pump only held 3" of vaccum. This out of the box, never opened. After modifying the pump, just the pump, we were able to hold around 18-20" of vaccum. That's a 600% increase of stock. Along with the other mods we do, there was an increase of flow for about 8-10 %, all this helping with cavatation at higher rpms. The gears, the only thing different is the material and another process we use to make the gears stronger. While I haven't tested the VHR yet, I don't see why we cant replicate what we did with the DE. I hate to put it like this, but you can buy a nismo, know that they fail, and be out of pocket $1400. If not, you can go with our pump, save money and at least get the same performance if not better, and have billet gears and a billet back plate. We are using a Nismo pump as our base, to make this an even closer comparison, not just a regular VHR pump. Rusty likes this.

02-26-2016, 08:36 AM	#178 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3381	Can I use the billet gears and back plate if I already have the Nismo pump? iPhone Total D likes this. __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

02-23-2016, 02:01 PM	#167 (permalink)
Total D Base Member Join Date: Apr 2011 Location: USA Posts: 159 Drives: 03 Nissan 350z PPW M Rep Power: 6725	I haven't looked at a GT-R oil pump to be able to give you that answer. If I can get my hands on a pump, then I'd be able to further investigate. If not the same, and gears are an issue, then I guess I'd be looking at making those as well.

02-23-2016, 05:14 PM	#170 (permalink)
Total D Base Member Join Date: Apr 2011 Location: USA Posts: 159 Drives: 03 Nissan 350z PPW M Rep Power: 6725	Thanks Charles, for clariflying that for us.

02-24-2016, 03:57 PM	#175 (permalink)
Total D Base Member Join Date: Apr 2011 Location: USA Posts: 159 Drives: 03 Nissan 350z PPW M Rep Power: 6725	It will be priced below the Nismo and provide you a better pump that addresses the issues even the Nismo deals with.

02-26-2016, 01:16 PM	#179 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,245 Drives: Tricycle Rep Power: 548883	What other items would be needed to spin higher RPM's other than these gears and tune? imjello likes this.

02-26-2016, 01:26 PM	#180 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	better crankshaft, valve spring upgrade __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any interest in a Volk TE37 SL Group Buy again?	SE	Wheels & Tires	22	05-06-2013 02:49 PM
Group Buy-BC Racing BR coilover Interest thread	g37xck	Brakes & Suspension	1	03-22-2013 04:40 PM
Brake Pad Backing Plate Importance	fuzzywuzzy	Brakes & Suspension	4	07-08-2012 08:00 PM
Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	02-21-2011 07:38 AM
Front license plate carbon fiber backing group buy!	SpawnAeroJohn	Nissan 370Z General Discussions	14	07-06-2009 09:04 PM