DIY: Z1 Intake Plenum and Spark Plug Swap [Picture Heavy]

John@Z1

Way to plug yourself again. I see you on every Z1 plenum thread, after you purchased our plenum to see how far you could port your own. Must be a nice coat tail ride. Since you are now a sponsor please try to carry yourself a little better. We expect more out of The370Z.com sponsors.

To answer 1cleanZ. I tell all that the Motordyne is better for low end while the Z1 is better on topend. We spend more time on the top of the graph at the track and on mountain runs.

__________________
Z1 Motorsports will beat any advertised price on Nissan OEM Parts!
770-838-7777 ext 311
AIM: JohnatZ1
email: John@Z1motorsports.com

synolimit

I never purchased your manifold for me, I don't own a HR motor. That was a customer in Dubai that did who bought our TB's and lower. And check your dates Jon. I first had stuff ported for just me months before and my mani was already done and installed before I ever started doing it for others!! The porter I have do this lives in Indy and never saw your mani. Kinda hard to coat tail isn't it? Go ahead and check your dates when he bought and then check my date when I started the porting thread. I'll wait....

And I'm sorry, I didn't know you were the only one allowed to do something. O and since I started porting the TB's and lower first, does that mean you're coat tailing off me?

We are also finishing up flow bench testing now and we dynoed the stock vs ported stock, I haven't seen either from you guys so you sure you want to call me out?

And I'll continue to conduct myself the way I do. If I feel threatened, attacked, called out, trolled upon etc I'll respond in a way that's equal and to put them in their place they need to be at. And if I call someone out like you just did I'll at least have my facts straight. I'll ask you to do the same.

__________________
13 370z-

JARblue

__________________