DIY Yaw Sensor rocker switch

GoldenDragon

i have an 09 370z m/t.
i bought another hazard light switch and wired the yaw switch mod to that switch and put it into the blank switch opposite of it (passenger side of shifter). This only works on the m/t, automatic's actually have a functional switch there.
Spray painted the top of the swich silver to match the silver trim. At a glance if the button is flush with the trim the yaw is disconected and the dummy warning light is on. When the button is depressed, its back to stock with no dummy lights. It's always in off mode unless i need to bring it to a shop (drove them nuts, cause they couldnt clear it).
I also have the heated seats, so 2 out of the three slots where filled on the center console. I used the middle slot and put a dim green illuminated switch, that controls my drl's in the headlight housing. It's the one wire mod for drl's on earlier model 370z's on this site. Just a different way of using the limited space while keeping it stock looking.