Nissan 370Z Forum  

DIY: Front Stud replacement/ Spacer install

I am planning on using 20mm spacers all around. would i probably have to use a different method to get the lugs in there? also would i be able to

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree14Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 07-30-2009, 06:46 AM   #16 (permalink)
Base Member
 
DuNw/4BanGerZ's Avatar
 
Join Date: Apr 2009
Location: Virginia Beach
Age: 40
Posts: 92
Drives: 2009 370Z MB M6 w/sp
Rep Power: 15
DuNw/4BanGerZ is on a distinguished road
Default

I am planning on using 20mm spacers all around. would i probably have to use a different method to get the lugs in there? also would i be able to just use V2 in the front?
DuNw/4BanGerZ is offline   Reply With Quote
Old 07-30-2009, 06:35 PM   #17 (permalink)
Base Member
 
tonmed123's Avatar
 
Join Date: Apr 2009
Location: Houston,Texas
Posts: 223
Drives: 09 370Z Red M6
Rep Power: 266
tonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond reputetonmed123 has a reputation beyond repute
Default

Quote:
Originally Posted by DuNw/4BanGerZ View Post
I am planning on using 20mm spacers all around. would i probably have to use a different method to get the lugs in there? also would i be able to just use V2 in the front?
Post some pics asap once you get them!
tonmed123 is offline   Reply With Quote
Old 10-15-2009, 11:18 AM   #18 (permalink)
Enthusiast Member
 
Join Date: Sep 2009
Location: Hawaii
Posts: 351
Drives: STI, MDX, Titan
Rep Power: 304
abakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond repute
Default

What is the ft/lbs to put the Version 2 spacer to the hub on the rear using their lugnuts?

Not sure how Im going to torque em down without a impact gun, but maybe if Im strong enough to hold it from turning..
abakja1 is offline   Reply With Quote
Old 10-16-2009, 12:11 PM   #19 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by abakja1 View Post
What is the ft/lbs to put the Version 2 spacer to the hub on the rear using their lugnuts?

Not sure how Im going to torque em down without a impact gun, but maybe if Im strong enough to hold it from turning..
Set the parking brake and torque to 90-100 lbs....About the same as the main wheel lugs..
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 10-16-2009, 12:17 PM   #20 (permalink)
6MT
A True Z Fanatic
 
6MT's Avatar
 
Join Date: May 2009
Location: ITU Zone 2
Posts: 22,459
Drives: Reliant Robin
Rep Power: 1789
6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute
Default

Quote:
Originally Posted by Modshack View Post
Set the parking brake and torque to 90-100 lbs....About the same as the main wheel lugs..
90-100 ft/lbs may be too high. OEM spec for the lug nuts is 75-80 I believe.
__________________
Andrew

2009 370Z Sport/Touring 6MT sold
2013 Honda Civic Si coupe D/D
6MT is offline   Reply With Quote
Old 10-16-2009, 12:25 PM   #21 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by 6MT View Post
90-100 ft/lbs may be too high. OEM spec for the lug nuts is 75-80 I believe.
Service manual says 80......I always torque to 90 per guidelines for other cars I've owned. I have a dedicated torque wrench just for wheels. The real caution is to avoid putting a 400 ft lb impact gun on them.......10-15 lb differential is not a lot. I'd rather error on the side of tight than loose...YMMV.
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 10-16-2009, 12:33 PM   #22 (permalink)
6MT
A True Z Fanatic
 
6MT's Avatar
 
Join Date: May 2009
Location: ITU Zone 2
Posts: 22,459
Drives: Reliant Robin
Rep Power: 1789
6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute6MT has a reputation beyond repute
Default

Quote:
Originally Posted by Modshack View Post
Service manual says 80......I always torque to 90 per guidelines for other cars I've owned. I have a dedicated torque wrench just for wheels. The real caution is to avoid putting a 400 ft lb impact gun on them.......10-15 lb differential is not a lot. I'd rather error on the side of tight than loose...YMMV.
Yep, I do the very same thing.
__________________
Andrew

2009 370Z Sport/Touring 6MT sold
2013 Honda Civic Si coupe D/D
6MT is offline   Reply With Quote
Old 10-17-2009, 06:45 AM   #23 (permalink)
Enthusiast Member
 
Join Date: Sep 2009
Location: Hawaii
Posts: 351
Drives: STI, MDX, Titan
Rep Power: 304
abakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond repute
Default

I usually tq wheels at 85ft/lbs, but I can deal with 90ft/lbs,..I hope the parking break can hold since it going to be a 1 man job.
abakja1 is offline   Reply With Quote
Old 11-29-2009, 07:23 PM   #24 (permalink)
Enthusiast Member
 
Join Date: Sep 2009
Location: Hawaii
Posts: 351
Drives: STI, MDX, Titan
Rep Power: 304
abakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond reputeabakja1 has a reputation beyond repute
Default

just read this thread again as I will need to do this mod soon and have some ideas to save some money... So chime in if more experienced mechanics/DIY'ers disagree..

1. I would take off 1 at a time and remount, but wouldn't it be easier to remove each oem stud using a hammer and punch to "push" them out?

2. Using the access hole, you can punch the new studs back in.

3. I agree using anti-sieze on the spacers so they dont stick and on the studs as well..

Let me know as I plan to do this when weather gets better during a weekend... Turkey cooking and BF shopping had me busy this weekend..
abakja1 is offline   Reply With Quote
Old 11-30-2009, 08:38 AM   #25 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by abakja1 View Post
just read this thread again as I will need to do this mod soon and have some ideas to save some money... So chime in if more experienced mechanics/DIY'ers disagree..

1. I would take off 1 at a time and remount, but wouldn't it be easier to remove each oem stud using a hammer and punch to "push" them out?

2. Using the access hole, you can punch the new studs back in.

3. I agree using anti-sieze on the spacers so they dont stick and on the studs as well..

Let me know as I plan to do this when weather gets better during a weekend... Turkey cooking and BF shopping had me busy this weekend..
I think you'll have a hard time doing it that way. While you can use a punch, the method shown is meant to preserve the parts witout distorting the studs or messing up threads.

On putting them in, it take quite a bit of force. there's not much swinging room back there. Pulling them in with the impact is the best way.

Many do not recommend antiseize of lug threads
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 02-14-2010, 10:16 AM   #26 (permalink)
Base Member
 
Join Date: Feb 2010
Location: nyc
Posts: 10
Drives: mitsubishi
Rep Power: 15
schao is on a distinguished road
Default

won't the spacers change the offset of the wheels and put extra stress on the bearings?
schao is offline   Reply With Quote
Old 02-14-2010, 10:29 AM   #27 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by schao View Post
won't the spacers change the offset of the wheels and put extra stress on the bearings?
Yes
No

I and many of my friends have used spacers on various cars for many years. Nowhere have we ever seen any evidence of accelerated wheel bearing wear. 10-20mm is not a lot if offset increase..
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 03-28-2010, 02:13 PM   #28 (permalink)
A True Z Fanatic
 
batman_4's Avatar
 
Join Date: Dec 2008
Location: McAllen Tx.
Posts: 1,038
Drives: '09 PW 370Z
Rep Power: 367
batman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond repute
Default

if i have never used an impact gun would you still recommend i do the front stud replacement? that step confuses me....so using the impact gun is bringing the stud out towards "us" to fit in place?

im assuming home depot or such would rent out an impact gun or am i wrong?
__________________

'09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE
batman_4 is offline   Reply With Quote
Old 03-28-2010, 05:47 PM   #29 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2185
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Quote:
Originally Posted by batman_4 View Post
if i have never used an impact gun would you still recommend i do the front stud replacement? that step confuses me....so using the impact gun is bringing the stud out towards "us" to fit in place?

im assuming home depot or such would rent out an impact gun or am i wrong?
you could do it with a regular long bar socket wrench, but you would need a helper stepping on the brakes and your muscles would get really tired.
The ends of the bolts are knurled, and are normally pressed into the hub. When you install them after initial assembly, they are pulled in with the impact wrench, or you could pull them in the same way manually, but you are putting a the stud into a slighly smaller hole, hence the getting really tired part.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 03-29-2010, 12:50 PM   #30 (permalink)
A True Z Fanatic
 
batman_4's Avatar
 
Join Date: Dec 2008
Location: McAllen Tx.
Posts: 1,038
Drives: '09 PW 370Z
Rep Power: 367
batman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond reputebatman_4 has a reputation beyond repute
Default

Quote:
Originally Posted by Mike View Post
you could do it with a regular long bar socket wrench, but you would need a helper stepping on the brakes and your muscles would get really tired.
The ends of the bolts are knurled, and are normally pressed into the hub. When you install them after initial assembly, they are pulled in with the impact wrench, or you could pull them in the same way manually, but you are putting a the stud into a slighly smaller hole, hence the getting really tired part.
gotcha

Any experience w/an impact gun? I'll probably tackle it later today....but have never used one. They self explanatory?
__________________

'09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE
batman_4 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
H&R 20mm Stud-Replacement Front Spacer Install Alstann Wheels & Tires 8 03-03-2019 05:39 PM
Spacers -- Bolt On vs Stud Replacement axmea? Wheels & Tires 10 12-15-2012 11:39 PM
LTT H&R 10mm Stud Replacement Spacers for 15mm stud replacement H&R chuckd05 Parts for sale (Private Classifieds) 5 02-16-2011 05:05 PM
WTB: H&R 15mm stud replacement spacers spearfish25 Parts for sale (Private Classifieds) 1 08-29-2010 03:57 PM


All times are GMT -5. The time now is 03:41 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2