DIY: of complete FOG LAMP install

jadeb0x · 02-14-2011, 09:45 AM

Quote:

Originally Posted by Dembflyr

I may have missed it in this thread but...

What bulb would I use for the 7443 dual filament socket if I wanted it to be a tail light and a brake light? What wattage make the fog as bright as the other tail and brake lights?

Thanks.

not sure of your question exactly, but i'll try to answer your question otherwise.

the oem fog light comes with a 7440 harness with 7440 bulb which is a single filament. thus, it has the always on look.

you can modify a 7443 harness with 7443 bulb to fit inside of the oem fog light. the 7443 bulb has dual filament that has the low/high intensity for parking/brake features. i'm personally using a wal-mart or sylvania brand of bulb that cost me around $2.

hope that cleared things up for you.

Dembflyr · 02-14-2011, 09:56 AM

Quote:

Originally Posted by jadeb0x

not sure of your question exactly, but i'll try to answer your question otherwise.

the oem fog light comes with a 7440 harness with 7440 bulb which is a single filament. thus, it has the always on look.

you can modify a 7443 harness with 7443 bulb to fit inside of the oem fog light. the 7443 bulb has dual filament that has the low/high intensity for parking/brake features. i'm personally using a wal-mart or sylvania brand of bulb that cost me around $2.

hope that cleared things up for you.

Thanks. I realize now that my question was worded poorly.
I ordered the 7443 socket and I was just making sure that the standard bulb that fits it would look right.
I am wiring it so that the foglight is on with the parking lights and gets brighter with the flip of a switch.
That way it still accents the rear but also works as a fog light.

RockStarKick · 02-14-2011, 10:35 AM

Quote:

Originally Posted by jadeb0x

not sure of your question exactly, but i'll try to answer your question otherwise.

the oem fog light comes with a 7440 harness with 7440 bulb which is a single filament. thus, it has the always on look.

you can modify a 7443 harness with 7443 bulb to fit inside of the oem fog light. the 7443 bulb has dual filament that has the low/high intensity for parking/brake features. i'm personally using a wal-mart or sylvania brand of bulb that cost me around $2.

hope that cleared things up for you.

So will the 7443 bulb socket fit directly into the fog-light housing ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM