DIY: LED Halo w/Video's

Slowfashow

Nut_n_Much, Quick question. Are the G35 lenses full concave (bowl shaped inside)? I have a set that I took off some g35 coupe headlights and they are concave on the outside and flat on the back side instead of being concaved as I imagined they would be. just hoping the small LED turn signal will fit once I put them on the 370. Thanks.

Nut_N_Much

The g35 lens is flat on the back & concave on the front. As long as the LED your using is the same size or shorter that the amber stock turn signal bulb you will be good. If the LED replacement bulb your using is a little longer than the stock bulb it should be okay. chtr11 had a set when we did his but they were white instead of amber so we didn't us them..

When we had the light pulled apart you can see the chrome turn signal reflector clearly with the amber bulb in it. The bulb doesn't stick out past the edge of it. Once you convert the shroud to a G35 lens you have 1/8 to 1/4 inch gap between the chrome reflector and the lens. Not much room to work with. I'll take a picture of the set I have from a customer. Give me a sec i'll be back.

Edit to add pics:

Attached Images

	IMG_0586.jpg (667.1 KB, 37 views)
	IMG_0587.jpg (641.6 KB, 42 views)

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html