DIY: Illuminated Kick Plates

SCHREP · 10-20-2009, 02:41 PM

The lighted kick plates are great. Mine only took about 40 minutes to
install. Would recommend them to anybody with half a brain.

simota1 · 10-20-2009, 04:39 PM

install took me a longer haha like one and a half considering i was being super careful and i had a hard time unplugging the harness...

none the less its a great and easy mod...

Vapiano · 08-08-2011, 10:13 PM

Quote:

Originally Posted by SCHREP

The lighted kick plates are great. Mine only took about 40 minutes to
install. Would recommend them to anybody with half a brain.

, the only tool needed was a small screw driver. These add a real nice touch to the car.

freaky · 08-09-2011, 08:55 PM

im ready to tackle this mod, my kickplates have arrived from the US. Mine is a right hand drive australian Z.

does anyone have any pics of whereabouts the cable goes across the transmittion tunnel on both sides, its the only bit I am unsure of.

Is it more towards the firewall or more towards the seats ? and do i have to have the carpet rolled back when i attempt to pass it through ?

Vapiano · 08-09-2011, 10:06 PM

Quote:

Originally Posted by freaky

im ready to tackle this mod, my kickplates have arrived from the US. Mine is a right hand drive australian Z.

does anyone have any pics of whereabouts the cable goes across the transmittion tunnel on both sides, its the only bit I am unsure of.

Is it more towards the firewall or more towards the seats ? and do i have to have the carpet rolled back when i attempt to pass it through ?

You run the wire between the firewall and the back of the radio console, on the passenger side near the power outlet you will see an opening to the top left, attach the wire to a metal hanger and fish it through until it passes through the other side near the gas pedal and follow the instructions in the kit.

10-20-2009, 04:39 PM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	install took me a longer haha like one and a half considering i was being super careful and i had a hard time unplugging the harness... none the less its a great and easy mod... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Illuminated Kick Plates	pfdaxe	Parts for sale (Private Classifieds)	9	10-11-2012 06:58 AM
Illuminated kick plates always on?	KptKIDLAT	Exterior & Interior	15	08-30-2012 10:08 PM
WTB: Illuminated Kick Plates	Boost_lee	Wanted	0	01-30-2011 03:28 PM
Illuminated Kick Plates	KptKIDLAT	DIY Section (Do-It-Yourself)	3	08-29-2010 08:53 AM
Illuminated Kick Plates	twotonezed	Parts for sale (Private Classifieds)	7	06-22-2010 12:53 AM

10-20-2009, 02:41 PM	#1 (permalink)
SCHREP Base Member Join Date: Oct 2009 Location: COLORADO Posts: 10 Drives: 09 370Z BLUE 6 SPEED Rep Power: 17	The lighted kick plates are great. Mine only took about 40 minutes to install. Would recommend them to anybody with half a brain.

08-09-2011, 08:55 PM	#4 (permalink)
freaky Base Member Join Date: Feb 2011 Location: Sydney Posts: 3 Drives: MY10 370z 7AT Rep Power: 16	im ready to tackle this mod, my kickplates have arrived from the US. Mine is a right hand drive australian Z. does anyone have any pics of whereabouts the cable goes across the transmittion tunnel on both sides, its the only bit I am unsure of. Is it more towards the firewall or more towards the seats ? and do i have to have the carpet rolled back when i attempt to pass it through ?